crabby cooter
ArboristSite Operative
yeah, I got a bad heart, 2heart attacks and a stroke in the last two years. can't do the things I used to. thanks for the reminder, ass wipe
That's really lousy, but then it's not like that had anything to do with our discussion or my comment, or that you'd somehow forgotten about it until then. And I don't know who you are. But I hope your real condition improves and you have a nice holiday season.yeah, I got a bad heart, 2heart attacks and a stroke in the last two years. can't do the things I used to. thanks for the reminder, ass wipe
I know this is a old post but are you the guy that brought the 1 and only 150t to the snuffbandit gtg 2 yrs ago?I have the Echo 271. Like it so much I sold my Stihl 150t.
150t dyed the covers. Needed more orange like the echo husky and bigger stihls. When there is 3 150t saws next to each other I had to have mine stand apart from the other stock sawsIs that an 015?
I did put some thought into doing the tank case too but I needed to get the saw running broke in and making money and the old 015 restored was a inspiration along with I like my orangeI asked the same question...he dyed it & it looks much nicer than the OEM colored filter cover. He should do all the plastics the same IMO. That's how the ms150 'should' look following the 015 models of yesteryear.
Hey you have been into these saws. Does the intake boot have a devider in it like the 201t? If so have you cut that out of the 150t and noticed any difference in how it runs half throttle and wfoIs that an 015?
Yes the liquid dye mango something color from Walmart. I went about 2 minutes too long but it looks good stihlIs that RIT dye?
I've never done anything more than a MM, timing advance, and removing the limiters from the carb. Yes, the intake does have a divider. I'd love to get back until mine and completely gut the strato, just like I do on the 241 & 261.Hey you have been into these saws. Does the intake boot have a devider in it like the 201t? If so have you cut that out of the 150t and noticed any difference in how it runs half throttle and wfo
Well if it don't work well in the boot at least it's a bolt on part. Well when you jump back into it keep me posted.I've never done anything more than a MM, timing advance, and removing the limiters from the carb. Yes, the intake does have a divider. I'd love to get back until mine and completely gut the strato, just like I do on the 241 & 261.
When I do it, I'll probably go whole hog and take my chancesWell if it don't work well in the boot at least it's a bolt on part. Well when you jump back into it keep me posted.
Yes the liquid dye mango something color from Walmart.
No I didn't use vinigar just heat up a few gallons of water till its almost at a boil and mix a bottle in and let it cool a bit and soak parts till desired color is achieved. Only tip I have is make shure ur parts are 100 percent oil free. Dawn dish soap n hot water works greatTangerine? I see it's for clothing but have never used it before. Anything different in the instructions for plastic?
Enter your email address to join: