big saws in action

[sawfun9]

Here's videos of my Domar 166, Jonsereds 111S, and Homelite 750 in action. I hope I did this correctly.

The 166 in it's first cut in the cedar.mvi_0278.avi - YouTube

The next one is the second cut with the 166.mvi_0281.avi - YouTube

Now the Homelite 750http://www.youtube.com/watch?feature=player_detailpage&v=a6nQaxsok0A

And finally the Jonsereds 111Shttp://www.youtube.com/watch?feature=player_detailpage&v=GQOEtD5gkDQ

 

[sawfun9]

Looks like I messed up the last two. I'll try again.

Jonny 111S[video=youtube;GQOEtD5gkDQ]http://www.youtube.com/watch?feature=player_detailpage&v=GQOEtD5gkDQ[/video]

And the Homelite 750[video=youtube;a6nQaxsok0A]http://www.youtube.com/watch?feature=player_detailpage&v=a6nQaxsok0A[/video]

 

[John in MA]

Nothing else sounds like a 111S. I miss mine already.

 

[pops21]

Watching those vids gives me the itch to go run my 288.:msp_biggrin:

 

[leeha]

Looking good. Loosen the chain on the 166.
Shouldn't be getting smoke off the bar and out of
the wood like you are.
Is that the saw with the Wiseco piston. If so i
hope you broke it in like i said before tackeling
that big piece of wood.




Lee

 

[mile9socounty]

Its nice to see some big saws, long bars from our Wrong Coast side. Hit ya up with some rep too.

 

[In The Weeds]

Holy hell, thats a big cedar! Around here they top off at about 12" diameter lol. Aint that tree worth some money?

 

[cbfarmall]

Nothing else sounds like a 111S. I miss mine already.

Can't wait to get mine. Should be today.

Chris B.

 

[MacLaren]

Great vids man. Keep em comin......

 

[John in MA]

Can't wait to get mine. Should be today.

Chris B.

I'll give ya $500 for it.

 

[OREGONLOGGER]

Lets see that Super 250 you got from me...I need to bring some big saws so I can stick them in some big Cedar..Mini GTG :hmm3grin2orange:

 

[mdavlee]

I like the sound of those big dolmars. The 111 does sound good too. I would love to own any of them.

 

[Whiskers]

Thanks for sharing the videos. Nothing like some monster cookies!

 

[ptjeep]

Nice vids! I love running 100cc plus size saws, just hate carrying them. Out of the three, which seemed strongest?

 

[paccity]

great vids , look's like a standard cold humid oregon day with the steam comeing off your chain.

 

[Bob Wright]

Nice vids. We have Willow and Maple that big but thats about it oh and a huge Tree of Heaven up the street i have my eye on...Bob

 

[sawfun9]

Yea, that was steam since I forgot to keep the bar oil where it would stay warm. The wood was partly frozen as well. Out of all three the 166 was the strongest by far. The 111S has more torque than the 750 but they cut about the same speed even though the 750 is a higher rpm saw.

Next year I'm gonna try and tackle some more of that big cedar with an 84" bar on my 090.

To get this one down we used my 460 with a 28" bar as the pilot saw and my ported 880 with a 36" bar to make the face cut. My Mac 125 with a 50" bar did the back cut. The 50" bar was a bit short, and my 090 with a 60" bar was acting up, but we used what we had. The property has more big stumps and snags that are much bigger than this one, but harder to get at. We'll have to cut trails to get at them as they're is many downed alders around them and it's pretty steep terrain. This was the easy one.

 

[Ambull]

Never seen a Cedar like that before. Holy moly!!! Nice job on the vids. That 166 sure runs strong.

 

[leeha]

See, You need to get one. :smile2:




Lee

 

[Teddy.Scout]

GREAT VIDS!!!!!!!!!!!!!
Always appreciative of the time it takes to do these things!!!!
A+++++++++++++++++++