C Canatct ArboristSite Lurker Joined Jan 20, 2017 Messages 36 Reaction score 17 Location Southwest Virginia May 17, 2020 #1 I’m replacing the Energy detent valve on my 26 ton Brave. Is it necessary to relieve the hydraulic pressure before unscrewing the detent assembly?
I’m replacing the Energy detent valve on my 26 ton Brave. Is it necessary to relieve the hydraulic pressure before unscrewing the detent assembly?
R rancher2 Addicted to ArboristSite . AS Supporting Member. Joined Dec 31, 2008 Messages 1,098 Reaction score 1,075 Location malcoln NE May 17, 2020 #2 Just to be safe cycle the valve a few times with the engine off before you start loosing fitting on the valve. You don't want any surprise's.
Just to be safe cycle the valve a few times with the engine off before you start loosing fitting on the valve. You don't want any surprise's.
triptester Addicted to ArboristSite . AS Supporting Member. Joined Nov 7, 2006 Messages 1,611 Reaction score 510 Location S.E.Wisc. May 19, 2020 #3 If you are planning on taking the detent assembly apart be aware there are several small ball bearings that are under spring pressure.
If you are planning on taking the detent assembly apart be aware there are several small ball bearings that are under spring pressure.
S shansen ArboristSite Lurker Joined Jan 19, 2009 Messages 31 Reaction score 11 Location Cedar Rapids, Iowa Jun 3, 2020 #4 You may already have this, but here are the instructions to replace the detent spring cover assembly. Attachments 36403x.pdf 173.2 KB · Views: 4
You may already have this, but here are the instructions to replace the detent spring cover assembly.
Big_Eddy ArboristSite Operative . AS Supporting Member. Joined Sep 13, 2016 Messages 339 Reaction score 525 Location Eastern Ontario Jun 4, 2020 #5 Put a bag over the detent before removing the collar - save yourself an hour searching every nook and cranny for lost balls.
Put a bag over the detent before removing the collar - save yourself an hour searching every nook and cranny for lost balls.