Carb - Remove needle, spring and post

[JamesReed]

I have a Walbro HDC carb and plan on replacing the diaphrams. Usually the carbs I work on has a screw that holds the needle assembly but this one does not. How do I remove the needle, spring and post unit? Here is a picture I am trying to load of it. Geez, this has got to be simple!

Thanks in advance.

 

[Lakeside53]

unscrew the two screws and pry it up the plate.. that's a real old one.. Have fun getting the gasket off.

 

[Fish]

Remove the 2 screws that hold the circuit plate down, if you dare, and have a
replacement gasket, if not, leave it alone

 

[CrazyCarl]

HDC carb

I have new HDC carb kits if you are interested.:hmm3grin2orange:

 

[SawBum]

If you get it off and but a carb kit, MAKE SURE you match the gasket before you tear up the old one or throw it away, this is critical, your kit will come with more than one gasket and the passage slots will all be different.:help: