Christmas time...

[husqvarnaguy]

I like venison jerky!!!!

Next batch that we make, I might send you some then.

 

[Scooterbum]

Next batch that we make, I might send you some then.

Never had it. Does it taste like chicken?

 

[husqvarnaguy]

Never had it. Does it taste like chicken?

Naw tastes like bacon.












Just kiddin tastes like jerky.

 

[sefh3]

Never had it. Does it taste like chicken?

Sure does. Everything tastes like chicken.

 

[stihl023/5]

Sure does. Everything tastes like chicken.

Chicken tastes better wrapped in bacon!!!!!!!!!!!!!!!!!!:msp_w00t:

 

[Mr. Bow Saw]

Yes I do. The starter assembly I got was a bit small. I guess there were some slight design changes during the production of the 75's.
je

Will this one work on your saw?

 

[axlr8]

here is my list of free for the shipping stuff

372 cylinder cover plastic

NEW tecomec 051 cylinder and piston. Needs wrist pin, circlips, and wrist pin bearing. and too be cleaned up

041 clutch cover

stihl 028 front tension clutch cover

the rear half of an 034 super muffler

Husky 359 FW

Husky 372 FW rubbed a little.. will work fine

oregon .325 chain. .063 guage? 74 DL

Stihl 066 filter base

used 372 air filter. good usable

usable 371K airfilter

394- 395 H, L idle plastic guide PN 503 97 48

346 bucking spike

bag of torn apart carbs zama and walbro mixed

stihl 066 carb... for parts

and thats about it! PM for more details!!!

 

[blsnelling]

I could use that 372 flywheel.

 

[axlr8]

Its a 'lil rubbed! coil worked its way loose, and smudged it a little! but it doesnt look like it will hinder its performance at all! PM an addy and I will get it sent tomorrow!

 

[blsnelling]

Its a 'lil rubbed! coil worked its way loose, and smudged it a little! but it doesnt look like it will hinder its performance at all! PM an addy and I will get it sent tomorrow!

Thank you, and Merry Christmas!

 

[axlr8]

Back at ya! Means alot coming from a higher member here!

 

[cutforfun]

I could use that 372 flywheel.

would an aftermarket one work , sorry i could not help my self

I think i have an oem one, i will ck in the morning if you still need it

 

[eiklj]

Will this one work on your saw?

It just looks like it might. I'm interested.

je

 

[o8f150]

i have these items up for grabs,, pm is the best way for me

i bought this anvil but it is to thick for my breaker
<a href="http://s171.photobucket.com/albums/u302/ken50243/?action=view&amp;current=010.jpg" target="_blank"><img src="http://i171.photobucket.com/albums/u302/ken50243/010.jpg" border="0" alt="Photobucket"></a>

12" bar,, 50 gauge off of a little skil saw
<a href="http://s171.photobucket.com/albums/u302/ken50243/?action=view&amp;current=011.jpg" target="_blank"><img src="http://i171.photobucket.com/albums/u302/ken50243/011.jpg" border="0" alt="Photobucket"></a>

18" echo bar,, 325 pitch 50 gauge

<a href="http://s171.photobucket.com/albums/u302/ken50243/?action=view&amp;current=009.jpg" target="_blank"><img src="http://i171.photobucket.com/albums/u302/ken50243/009.jpg" border="0" alt="Photobucket"></a>

 

[Philbert]

i bought this anvil but it is to thick for my breaker

Looks like the one that came with my Bailey's Woodland Pro breaker (recently discontinued). Should work with those.

Philbert

 

[o8f150]

Looks like the one that came with my Bailey's Woodland Pro breaker (recently discontinued). Should work with those.

Philbert

i have an older oregon breaker,, it has the flat anvil,, this one is to tall to even get under the punch

 

[o8f150]

anvil has a new home

 

[o8f150]

echo bar has a home

 

[Roll Tide]

I'm looking for a 034 muffler. Not picky as long as its not rusted. Any help would be great.

 

[jerrycmorrow]

I'm looking for a 034 muffler. Not picky as long as its not rusted. Any help would be great.

this should more properly be in the swap thread. this is the "out of the goodness of my heart i'm offering something" thread. just sayin.