diesel&coffee
ArboristSite Guru
ok was reading the 381/038 mag thread.. I have seen a lot, lot, lot of 031 AV's on EBAY lately.. Any comments on the 031 vrs the 032/030..
031's and 032's were excellent saws for the day, heavy in today's world, but great firewood saws, pro construction. Built like tanks and tough as hell. I have a 032 that I bought new almost 30 years ago, it has had nothing done to it but, replacing a few plugs, one air filter replacement and normal care and it Stihl runs like a new one. I have an 030 as well, but they weren't made but a year maybe two and have smaller displacement than the 031/032.
A good 031 or 032 can make someone a cheap dependable firewood saw that will last for years.
ok was reading the 381/038 mag thread.. I have seen a lot, lot, lot of 031 AV's on EBAY lately.. Any comments on the 031 vrs the 032/030..
agreed. I have one Stihl and its an 031AV, Very well built. Mine is an early model, made in West Germany. If you get one, you wont be disapointed.
<a href="http://s729.photobucket.com/albums/ww294/joe25da/?action=view¤t=saw061.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww294/joe25da/saw061.jpg" border="0" alt="Photobucket"></a>
Good god Joe that's in fantastic shape! Did you paint it?
Bob
No, I got it real greasy and dirty, I cleaned it and thats what was underneath. It neede a new plug wire carb kit and lines. I did spray the muffler. That saw is all original, even has the Duramatic hard nose. Runs as good as it looks too 170psi
why hardnose bars... even thou the bar is short - isn't a roller bar much better for the saw/chain??
There are still a lot of them out there, but between the ignitions dieing, and rewind parts are all obsolete, fixing them is getting rough.
They were 50cc's and a common setup around here is 3/8" with a 16/18" hard nose bar. I have seen a couple with 24" bars and had no idea how they could pull them.
I have a 20" Rollomatic E roller nose bar with the re-buildable sprocket and that thing chews! Semi-chisel even!
Enter your email address to join: