• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Trade Compatible piston for a solo 603

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

StihlGuitar

ArboristSite Operative
Joined
Dec 19, 2008
Messages
359
Reaction score
65
Location
Hamilton, MI
Does anyone have an idea of what might possibly work as a replacement piston for a 56mm Solo 603? I have ms660 big bore pistons and they are too short. I have 056 mag pistons and can’t find a wrist pin that would work….what about a husqvarna 2100?
 
A 2100 piston is going to be too tall and also uses a 13mm wrist pin, so you would have that problem.

The piston I'm looking for a rebuild on my 603 is a Partner K1200 piston. It's a 56mm slug that uses a 12mm wrist pin.

I'm not sure if it's the correct height but it looks fairly close.
 
A 2100 piston is going to be too tall and also uses a 13mm wrist pin, so you would have that problem.

The piston I'm looking for a rebuild on my 603 is a Partner K1200 piston. It's a 56mm slug that uses a 12mm wrist pin.

I'm not sure if it's the correct height but it looks fairly close.
I appreciate it. I’ll keep a lookout for a couple. Please do the same or let me know if you find one
 
Hi there, I was hoping if you could tell me which OEM part number the Partner K1200 piston is as there seems to be 2 that I,ve found. One is for the Partner K1200 & the other for the new Husqvarna Partner K1200. Your help would be very much appreciated
 

Latest posts

Back
Top