Dolmar 5105 initial carb settings

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mudfly

ArboristSite Operative
Joined
Feb 25, 2015
Messages
185
Reaction score
356
Location
NE MN
Anyone have the initial carb settings for a Dolmar 5105? Is it 1 turn out on both jets?

Background. Picked the saw up lightly used and I could not get this to tune at all so I was all over with the high and low jet. I thought I had an air leak. Turns out the air filter did not have the vent hole for the diaphragm and it was running low on fuel. I figured that out but now I'm way rich. I could probably figure it out eventually but it would be easier to start at the factory setting.

Thanks.
 
Back
Top