Sold Echo 351vl fuel line kit

[DisturbeD]

I'm in need of a fuel line for this little echo 351vl. I have a john deere 40v as well I could take from but both saws are in good enough shape to be runners so I'd rather not rob from the 40v. Anyways anyone have a used set? Or point me in the right direction on making my own.

I think normal fuel line can be used but the rubber seal/boot is bad as well and I'm not sure where I'd find one of those. So any help on a alternative would be nice as well. Picture of the seal/boot.

Both are really nice saws at the end of the day.
Could also use gas and oil caps for both the echo an john deere I'd be interested in

 

[TLG]

McMaster Carr military spec viton grommet. I've done several and works well.

 

[DisturbeD]

McMaster Carr military spec viton grommet. I've done several and works well.

Ok I'll try an look that up. I've had a few too many of this come around with bad gas lines.

 

[TLG]

Yes, all the ones I've done were just black gummy residue. Still working for a while yet or I would give you the part number. Is the white insert still good. If so the grommet and some tygon and you are back in business. Good luck young man.

 

[DisturbeD]

Yes, all the ones I've done were just black gummy residue. Still working for a while yet or I would give you the part number. Is the white insert still good. If so the grommet and some tygon and you are back in business. Good luck young man.

The white fitting still looks fine. An yeah this line wasnt goo yet but like melted an just falls apart an sticky. A part number later would be good. Just to make sure I get the right one the 1st time. An buy a few cause I'm sure I'll need them in the future

 

[TLG]

Here is what they look like. PM you all necessary specs, part numbers, pricing, and three types of measurements. Yes I'm anal on measuring LOL!!