BroncoRN Sep 15, 2016 BroncoRN ArboristSite Guru Joined Feb 15, 2012 Messages 804 Location Fl Sep 15, 2016 #41 Did you ever adjust the idle to see if that would keep it running?
kkemp Sep 15, 2016 kkemp ArboristSite Operative Joined Jul 6, 2016 Messages 115 Location indiana Sep 15, 2016 #42 Yes I did . That didn't work . I have to keep pumping the throttle
BroncoRN Sep 15, 2016 BroncoRN ArboristSite Guru Joined Feb 15, 2012 Messages 804 Location Fl Sep 15, 2016 #43 Does carb have low speed adjustment? Have you tried leaning that out?
kkemp Sep 15, 2016 kkemp ArboristSite Operative Joined Jul 6, 2016 Messages 115 Location indiana Sep 15, 2016 #44 Yes I tried that .
kkemp Oct 1, 2016 kkemp ArboristSite Operative Joined Jul 6, 2016 Messages 115 Location indiana Oct 1, 2016 #45 Ok. I bought a mityvac 8500 tester so I'll get back to working on this thing now .
kkemp Oct 1, 2016 kkemp ArboristSite Operative Joined Jul 6, 2016 Messages 115 Location indiana Oct 1, 2016 #46 It's not holding pressure and I can't build up any psi using the primer.
BroncoRN Oct 1, 2016 BroncoRN ArboristSite Guru Joined Feb 15, 2012 Messages 804 Location Fl Oct 1, 2016 #47 You some soapy water and look for the leak
ANewSawyer Oct 1, 2016 ANewSawyer Addicted to ArboristSite Joined Sep 3, 2014 Messages 1,627 Location Foothills of the Smoky's, TN Oct 1, 2016 #48 Make sure your block off material isn't porus. Had that happen.
kkemp Oct 1, 2016 kkemp ArboristSite Operative Joined Jul 6, 2016 Messages 115 Location indiana Oct 1, 2016 #49 I'm testing the carb . Although I should do the crankcase . Getting ready to do that now
ANewSawyer Oct 1, 2016 ANewSawyer Addicted to ArboristSite Joined Sep 3, 2014 Messages 1,627 Location Foothills of the Smoky's, TN Oct 1, 2016 #50 Maybe this will help: