beingeasy769
ArboristSite Lurker
I would like some feedback on a forced-induction saw motor. Use a larger saw, 80+cc, and use a very small turbo, perhaps from a small Kubota turbo diesel. The lag would be severe, but once the revs got past 6000rpm or so, the boost would take over. Also,a small nitrous container (the ones used to charge whipped cream dispensers) could be used to cool the turbo piping for brief periods of time. I believe with proper porting, a correctly tuned expansion pipe, 109 octane, and a high discharge coil, a 15HP 85cc saw could rule the world. ANY SUGGESTIONS!!?