PLAYINWOOD
ArboristSite Guru
What happened to Gink?...........was just wondering if he was gonna take the "turdlicker" challenge!......Hahahahahahaha!
Maybe you could show him how to run 120 fuel
What happened to Gink?...........was just wondering if he was gonna take the "turdlicker" challenge!......Hahahahahahaha!
I am not, what I am describing is the difference between bracket racing your mom's olds and running a top fuel car. Maybe turdlicker was a bit strong, but a gutted muffler and massaging the ports does not win a big contest. For example, one time I cut 3.46 seconds on 10X10 pine with my 3120 cold start- I was third! OK, I am a douchebag, thanks Jeff!
Have you seen anything faster? or are you going by heresay? just wonderin.
Your good at discounting yourself, you had the fastest 60 mm racesaw known to the world and you were a fast enough operator to keep up to it.... your one of few..and made 25 grand doing it
That saw is only a shadow of it self and still top 5, whats he have in the back shed?
Those fast 62 mm guys your referring to, how did they get fast? ask them
Hey Troy,
What has that crazy Craig been up
to?? The last time I seen him he kicked
my butt with some modified Solo!! Do you
Still live just down the rd from him?? Better
you than me!! I can't stand his laugh!! When
he starts laughing I am speechless!! Tell him
I said hello. Nice seeing you back on here.
later
Ya and Dennis doesn't even need to kneel down to lick someones turdhole!!!!!!!! hahahahahahahahahahahahahahaha hahahahahahahahahahahahahahaha hahahahahahahahahahahahahahaha hahahahahahahahahahahahahahaha
Just tell me where and when!! I will
meet you and Eric anytime any place!!
But I know that won't happen because
you are both chicken chits!!! But I will
gladly race either one of you!! So come
on Gink I accept your challenge!! Just
tell me when and where.
I kinda miss seeing Erics Texas two
step trying.... yes trying to cold start anyway.
What happened to Gink?...........was just wondering if he was gonna take the "turdlicker" challenge!......Hahahahahahaha!
Sorry to keep you hanging, been out of town with work. :msp_tongue:
####ty how that gets in the way of fun stuff...
So what do you say...441 alky pipe saws? You do a thread of YOUR work and I'll do one of mine?
haha Go back and read your post about
how you could build a 3120!!!! The best
thing is you already have one and so do
I. So lets build an all out 3120!! You was
the one that opened your mouth and said
how easy it wood be!! So there ya go!!
Nooooo, to easy for you to grab brothers parts! You wanted to make this personal because I didn't buy into your agenda because you didn't like someone I'm friends with! It is a shame because we never had one issue with one another but if you want to do this we are going to do something that neither of us have done and everything is from scratch, no pipes to copy nothing it is all fresh! All the years Cliff has been doing this I know he has many notes on that motor and all you have to do is copy it...not hard to do that way. This is something neither of us have done so it is a heads up who can do what. The 3120 is later to come so I'm sure you will get what you want sooner or later, an all out race for the big motors. There is no plans of getting that motor done anytime soon but it will be! There will be some late nights doing that project.
Go back and read your post!!! You
made it look so easy. Now you are
saying you can't build one like you
said you could. What's up with that
did you get caught up in some BS
Rick, Where did YOUR motors place!? It's funny how the subject gets changed when there is tangible facts! But it looks like Bertrand motors may have got the nod! Rick do you actually build these motors or does Cliff?
But if you must ask...
If I wanted to build a big motor...which someday I may...
I can send a crank to falicon to have stroked...
I can buy rods...
I can buy custom pistons from a couple sources... Maybe the same ones Cliff get them from...
I can probably send some carbs out to get worked over...
I can probably send the cylinders out and get bored and plated and then to a machine shop to have a custom exhaust block made, Oh what the hell I may do that myself because I can.
I can make the head
I can make the pipe and I can bolt it all together just like you guys!
Maybe someday we'll see, you never know!
Now don't get your panties in a bunch, I'm just speaking up. Hope you have a good fathers day!
Nooooo, to easy for you to grab brothers parts! You wanted to make this personal because I didn't buy into your agenda because you didn't like someone I'm friends with! It is a shame because we never had one issue with one another but if you want to do this we are going to do something that neither of us have done and everything is from scratch, no pipes to copy nothing it is all fresh! All the years Cliff has been doing this I know he has many notes on that motor and all you have to do is copy it...not hard to do that way. This is something neither of us have done so it is a heads up who can do what. The 3120 is later to come so I'm sure you will get what you want sooner or later, an all out race for the big motors. There is no plans of getting that motor done anytime soon but it will be! There will be some late nights doing that project.
Here ya go!!!!
Go back and read your post!!! You
made it look so easy. Now you are
saying you can't build one like you
said you could. What's up with that
did you get caught up in some BS
Rick, Where did YOUR motors place!? It's funny how the subject gets changed when there is tangible facts! But it looks like Bertrand motors may have got the nod! Rick do you actually build these motors or does Cliff?
But if you must ask...
If I wanted to build a big motor...which someday I may...
I can send a crank to falicon to have stroked...
I can buy rods...
I can buy custom pistons from a couple sources... Maybe the same ones Cliff get them from...
I can probably send some carbs out to get worked over...
I can probably send the cylinders out and get bored and plated and then to a machine shop to have a custom exhaust block made, Oh what the hell I may do that myself because I can.
I can make the head
I can make the pipe and I can bolt it all together just like you guys!
Maybe someday we'll see, you never know!
Now don't get your panties in a bunch, I'm just speaking up. Hope you have a good fathers day!
ha ha ha, weren't you the one calling Frank a Chicken ****, now you're backing out, cause he doesn't want to play by what you say!!!!!!! ha ha ha ha ha ha ha.
Enter your email address to join: