How much back lean can you overcome withe wedges?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Youngbuck20

Youngbuck20

ArboristSite Guru
Joined
Nov 1, 2010
Messages
723
Location
Dalrymple, Ont, Canada
mdavlee

mdavlee

Tree Freak
Joined
Apr 18, 2008
Messages
18,144
Location
tn
The elm I have a video of had about 2-3' back lean. It took the whole wedge in it to get it to tip. I think it was the 8" K&H I used on it. One of the sycamores I didn't video took 2 wedges stacked to over come in and it was in the 20" on the stump and 75-80' tall.
 
RandyMac

RandyMac

Stiff Member
Joined
Sep 16, 2008
Messages
14,474
Location
51st State of Jefferson
Crazy meaning just huge trees. I assume those are a type of redwood, how come they seem very brittle? Or is that the properties of those types of trees? I've never even seen one in person . Biggest trees we see here in the northeast are just big pine and sometimes a 300 year old oak or maple.

Those were some kind of cedar, it is rare to find a big one that isn't rotten or full of defect. Some Redwoods have the rot, most have fire damage though.
 
Dayto

Dayto

ArboristSite Operative
Joined
Feb 1, 2008
Messages
123
Location
Van Island
Western Red Cedar , Douglas fir/Balsam some hemlock and yellow cedar ( Cyprus)
Is the wood they are falling .
Typical day for westcoast b.c fallers.
 
farmboy53

farmboy53

http://www.youtube.com/watch?v=oxst-7MmUfM
Joined
Mar 9, 2011
Messages
50
Location
Central
I use the wedge to keep the bar from getting pinched. Remember if the wind blows the wedge can fall out, as the tree starts forward out it comes only to have the wind bring the tree back with no wedge. If the tree has a back lean and the wedge falls out as described the saw gets pinched, the hinge breaks and major damage may occur. The wedge is no guarantee. If the tree has a back lean and you attempt to use a wedge to lift, while pounding you can break the hinge.
 

Latest posts

Top