Want to Sell Huskihl ported 562xpw

[mdavlee]

Selling my ported 562xpw. Saw has maybe 5 gallons of run time on the new top end I had ported for it by Kevin. Saw is a great runner with no issues. Looking for $650 OBO shipped in the lower 48.

 

[mdavlee]

 

[mdavlee]

 

[U&A]

Why does it sound like it’s missing so much even when it’s not hitting the limiter?

Or is that the video quality


Sent while firmly grasping my redline lubed RAM [emoji231]

 

[Deleted member 117362]

Why does it sound like it’s missing so much even when it’s not hitting the limiter?

Or is that the video quality


Sent while firmly grasping my redline lubed RAM [emoji231]

Not my saw. But, my ported 562xp will 4 stroke if not kept jammed in the wood.

 

[mdavlee]

Why does it sound like it’s missing so much even when it’s not hitting the limiter?

Or is that the video quality


Sent while firmly grasping my redline lubed RAM [emoji231]

Seems like it’s a combination of the timing advance and very light load is the only time it does it.

 

[U&A]

Not my saw. But, my ported 562xp will 4 stroke if not kept jammed in the wood.

Thank you for the clarification. This Saw looks like it cuts very well for a 60cc


Sent while firmly grasping my redline lubed RAM [emoji231]

 

[mdavlee]

Thank you for the clarification. This Saw looks like it cuts very well for a 60cc


Sent while firmly grasping my redline lubed RAM [emoji231]

It’s real strong for 60cc. I just don’t use it much with a ported 346 and 372 I can run 28-32” bars on.

 

[woodfarmer]

What does a port job on these new huskies involve?

 

[Oregonsaw]

Not my saw. But, my ported 562xp will 4 stroke if not kept jammed in the wood.

Is 4 stroking bad if not cutting?

 

[Deleted member 117362]

At idle saw should not four stroke, underload should not four stroke, coming out of cut, I like to hear it four stroke. Let's you know it's not running lean.

 

[mdavlee]

What does a port job on these new huskies involve?

Machining vase and chamber along with setting port timing and ignition timing along with a nice muffler mod.

 

[mdavlee]

Bump for price drop $600 shipped

 

[U&A]

I cant see the pictures (Tapatalk) but if you haven’t yet could you get a muffler off picture of the piston?

No rush.

I greatly appreciate it sir.


Sent while firmly grasping my redline lubed RAM [emoji231]

 

[huskihl]

@mdavlee
This was one of the first 562’s I ported. I probably advanced the timing too far for r&d purposes and then backed it off a little bit. If it needs a flywheel with less advance just let me know

 

[mdavlee]

Sold