doc874
Addicted to ArboristSite
The Husky 254 i have would flood etc... even after crab kit/carb pressure testing, new oil seals , new piston kit and lightly honed cylinder pressure reading after about five pulls is about 140 psi. Here's the thing, i had been alternating two spark plugs and still nothing other than flooding and the occasional two second run before flooding again. I finally tried another plug out of my P41. The saw started and actually ran for about 30 seconds or so. So now am i crazy in thinking that only a particular plug will work in this saw? I see on fleabay that sellers are selling "HUSKY' plugs, other than a brain, am i missing something here? I believe my problem now is fuel related, the fuel hose is the straight rubber not the curved type like on fleabay, ( if that makes any difference ) and it has some areas worn.
Last edited: