Husky 357xp or 365

[Conifercaner]

Trouble is the life expectancy must be severely reduced in this state of tune.

Similar to 2 stroke bikes!!!!

 

[scotclayshooter]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/b1tZUkHE_Fg&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/b1tZUkHE_Fg&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/7JhU54qrWcM&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/7JhU54qrWcM&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Thats a Work saw port job, It will wear out a ring a bit quicker but at £11 for a ring it aint bad.

The Race saw stage is where they wont last so long, Thats using a full on pipe exhaust like on a bike! They can grind off the fins on the flywheel.
Seems you dont need cooling for a few seconds of cutting time.

I think the chains help it make the cuts twice as fast as well so 2+2 could = 8!

 

[DougNH]

365: identicle saw to the 372 with the exception of the fact that the cylinder bore is.........watch out.........get ready........sit down........take a deep breath.........TWO whole milimeters smaller!!!

Oh my God! It's a pig. It's got no balls. It's heavy. Don't buy one.

Extra credit: Name two things that you won't find in the woods: A stop watch and a spec sheet.

Name two things that you WILL find in the woods:

Me and a 365!

I've got some square ground semi-skip on my 365 with a 22" Windsor Speed Tip bar and it's cutting like a banshee today!