JONSEREDFAN6069
Wheeler McDealer
WOOD pm me your email adress i got a pic of the breather for ya
PS: I'd bead blast that area, clean/degrease it, and repair it with Marine Tex. It is a commercial grade epoxy we use here in the shop to seal up carburetor bottom plugs permanently. It will hold back fuel, oil, etc and not get soft of fall off.
I looked at the picture magnified and it looks like it is also cracked below the front bar stud and running down into the adjustment screw area. Possibly a crack starting at back one too. Take a close look and see if I am right, might just be the pics. Also grab those bar studs and see if loose in the case. If they are and they are cracked around them, you will have to change the case.
Enter your email address to join: