Husqvarna 350

[jltrent]

I have a carburetor off a Husqvarna 350 with the primer bulb (2 hose hookup). I am wanting to put the carburetor on a Husqvarna 350 without the primer bulb (1 hose hookup). My problem is what to do with the extra hose hookup on the carburetor for the primer button to make it work.

 

[blsnelling]

Crimp the brass barb shut.

 

[Aggie 2012]

I have a carburetor off a Husqvarna 350 with the primer bulb (2 hose hookup). I am wanting to put the carburetor on a Husqvarna 350 without the primer bulb (1 hose hookup). My problem is what to do with the extra hose hookup on the carburetor for the primer button to make it work.

I did the same thing. Just left about an inch worth of hose on that nipple and plugged the end.
No issues here but I’m sure there’s a better /correct way to do this.




Sent from my iPhone using Tapatalk

 

[jltrent]

Crimp the brass barb shut.

I thought about putting a short hose on and nail in the hose. I didn't know if it would work or not. On crimping the barb shut recon I can get the gas stopped?

 

[Aggie 2012]

Mr Snelling knows his stuff.
The carb I am referring to actually came from him! Haha!

Thanks again Brad. Hope your doing well.


Sent from my iPhone using Tapatalk