husqvarna 40 problem

[lager65]

i have a husqvarna 40. it runs fine at full throttle, idle, but it bogs down and will die once you start cutting with it. does anyone know what the problem might be?

 

[CGC4200]

If compression and fuel mix are good:
You might check air filter,fuel filter, and condition of fuel lines & spark plug.
I have a Poulan Pro 260 I found some trash in carburetor inlet screen
causing a similar problem.

Good luck

 

[lager65]

hey thanks for the help but i found out the problem, there was saw chips in the inlet screen which caused it to not run properly