Husqvarna 50 Magnum

[SawGarage]

VIDEOS!!!!!

 

[Stihl Crazy]

Here is my 50 with a 5000 plus cyl.
http://www.youtube.com/watch?v=MNvQxlcZqbs

 

[SawGarage]

Here is my 50 with a 5000 plus cyl.
http://www.youtube.com/watch?v=MNvQxlcZqbs

Nice. quick runner!... pine it looks like?? is that the factory recoil? looks older.

 

[PLMCRZY]

Here is my 50 with a 5000 plus cyl.
http://www.youtube.com/watch?v=MNvQxlcZqbs

Is yours ported?

Another question, Does the stock husky carb directly fit? I have a rancher 55 that i was going to rebuild and do some porting to but if a better p/c will fit id like to go that route. Im guessing you would have to order a different muffler as well?

 

[buck futter]

this is picture 439

What is that pop?View attachment 154868

 

[Stihl Crazy]

Is yours ported?

Another question, Does the stock husky carb directly fit? I have a rancher 55 that i was going to rebuild and do some porting to but if a better p/c will fit id like to go that route. Im guessing you would have to order a different muffler as well?

I ported it alittle myself. The carb is a bolt on. Just opened the plastic intake tube to match.

 

[Stihl Crazy]

Nice. quick runner!... pine it looks like?? is that the factory recoil? looks older.

It is poplar. Saw is a 1983.

 

[Danger Dan]

this is picture 439

What is that pop?View attachment 154868

Good eye, but just a scratch from a slip of the mini grinder...woops umpkin2:

 

[PLMCRZY]

I ported it alittle myself. The carb is a bolt on. Just opened the plastic intake tube to match.

Ok great where do you find these p/c looked on ebay and no luck

 

[Stihl Crazy]

Ok great where do you find these p/c looked on ebay and no luck

I buy used ones. Hundreds of them here locally. Just have to dig them out.

 

[PLMCRZY]

I buy used ones. Hundreds of them here locally. Just have to dig them out.

I may have a lead to 2 of them a guy is wanting to get rid of. As far as porting what did you do? Did you just widen everything? Also does the stock 55 muffler fit it?

 

[freeweight]

so let me get this right,you can take partner 5000 is it? cylinder and piston and basically bolt it right on a 50-55cc husqy?

sorry if i am wqrong please explain

 

[SawGarage]

so let me get this right,you can take partner 5000 is it? cylinder and piston and basically bolt it right on a 50-55cc husqy?

sorry if i am wqrong please explain

correct. bolt it to a 50,51 or 55...

fun times!:greenchainsaw:

 

[freeweight]

even the NEW ones? how much power increase is there?this is very interesting to me,love learning new stuff

 

[SawGarage]

even the NEW ones? how much power increase is there?this is very interesting to me,love learning new stuff

New what? sir?? nothing NEW in this thread... unless it's New Old Stock...

J

 

[freeweight]

new models of husqy,50-55cc will the partner 5000's cylinder and piston fit them

 

[SawGarage]

new models of husqy,50-55cc will the partner 5000's cylinder and piston fit them

no.


you will want a Husqvarna:

Model 50
model 51
model 55

or the variants of... (55 rancher, 50 rancher, etc)



hope this helps.

 

[freeweight]

wow!!!? really

 

[SawGarage]

wow!!!? really

yes...a budget build of sorts..

as a 50-series saw with a smoked top end is usually cheap. I bought 4 for $150, and one ended up being a good saw, with nothing but a carb clean (top end was in good shape :dunno:

and got a 51 in a box of parts with some 372 stuff

just keep your eyes on CL, or even Ebay....you can find SUPER CLEAN, like new 55's on there, with bad top ends for <100

Jay

 

[freeweight]

naw i was making the wow-really comment about using husqy for short ,guess u were clucking wit me

anyway this is pretty cool to me