tomdcoker
Addicted to ArboristSite
Explain how it could possibly hurt the bearings?
Probably not hurt the bearings, but possibly the needle cage in the rod. Tom
Explain how it could possibly hurt the bearings?
how?Probably not hurt the bearings, but possibly the needle cage in the rod. Tom
the crank turns @ 12,000 rpms, how is the turning of an impact device going to produce more shock than that?
the crank turns @ 12,000 rpms, how is the turning of an impact device going to produce more shock than that?
Just to play devils advocate, you don't think that an explosion every revolution, immediately applying force in the opposite direction is pretty synonymous with an impact gun?Yes, but that is a continuous pressure where the impact wrench is a impact and release then another impact. My 2 cents worth and that will buy you 2 cents worth of anything you want. Tom
Every revolution in a 2 strokeJust to play devils advocate, you don't think that an explosion every other revolution, immediately applying force in the opposite direction is pretty synonymous with an impact gun?
Yes, I will fix that lol. I got caught in the midst of two thoughts, every revolution, every other change in direction. It's been a long couple weeks at work and home, very little sleep.Every revolution in a 2 stroke
Why not shove in 6" of recoil rope as a piston stop? Never seen that harm a piston topI don't really see an issue - it takes a minute to seat the piston stop and if you do that right there's virtually no risk to the piston or cylinder. Let me qualify that actually, the less common 90 degree threaded stops are more dangerous but as far as I know not really necessary anymore. They (Stihl) have the plastic stops that just squish between the crown and head.
I can see that Harley's method would save a couple minutes if you were looking for an air leak, though... I think it's great - got a new way to try something. Of course since I never use power tools I'll have to go hunting around the shop when I Need one.
Meth lab is in the basement!!!
Enter your email address to join: