I saw it on Ebay/Craigslist

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Chainsaws Stihl and Homelite for parts - $100 (Kingsley)

Blue Homelite saw, 2-Orange 360 Homelite, Mullculough saw with 20 inch bar complete not running, 029, 056, 064 Stihl Saws. All these saws are for parts of in need of rebuilt. $100.00 takes all saws

call ricky bobbie 712 540 2087
 
3 chainsaws (new holstien)

i have 1 stihl 041av that runs great well taken care of asking 200.00 obo i have 2 husqvarnas 1 is a 262xp 100.oo the other is a 272xp 150.00 obo on them. i will only take phone calls no emails thanks. 920-286-3400 mat
 
Husqvarna 394 XP Chainsaw - $425 (Fond du Lac)

Husqvarna 394 XP Chainsaw - $425 (Fond du Lac)


Date: 2011-02-01, 8:42PM CST
Reply to: [email protected] [Errors when replying to ads?]

For sale 1994 Husqvarna 394XP chainsaw with a 32"bar. Good runner with good compression. Starts right away. Bought the powerhead for a spare ice saw. Used it only a few times to cut timber. If you have questions please call me at (920) 539-9990
 
Indian Chainsaw Steel Sign ~ RARE! - $75 Minn.

Great garage memorabilia for the man cave, garage or or sign collection display.

CASH ONLY, Priced to sell, only $75.If interested - email or call 612-581-1637
 
Monkey Ward saw looks to be made by Homelite. Linden, Michigan

chainsaw 20 inch

Freakin thing looks like brand new.

Remington pl-4 maybe? Going by the filter cover.

I agree Chris. Looks like a bigger version of my SL-9.....which would most likely make it a PL-4. Remington certainly was 'influenced' by the XL12 Homelites. Don't think I'd pay that much for it. If it was a good runner then I'd maybe pay half of what he's asking. May be worth more to a Remington collector. Nice saw...:D
 
Would these be worth $50.00 and a two hour+ roundtrip drive?

Chain Saws need tinkering (3 Total)

I s/w the seller on the phone:
The Craftsman top handle doesn't run, suddenly quit while he was using it, he has no idea what the problem is.
The Mac 10-10A runs, but not properly.
The other saw is a 610 (I asked because I couldn't ID it), it runs.
 
Would these be worth $50.00 and a two hour+ roundtrip drive?
Chain Saws need tinkering (3 Total)

I s/w the seller on the phone:
The Craftsman top handle doesn't run, suddenly quit while he was using it, he has no idea what the problem is.
The Mac 10-10A runs, but not properly.
The other saw is a 610 (I asked because I couldn't ID it), it runs.

Just barely, assuming you get 28+ mpg. JM .02

10-10A = 40-50 USD
610 = 50-80 USD
Craftsman = Zip most likely
 
Just barely, assuming you get 28+ mpg. JM .02

10-10A = 40-50 USD
610 = 50-80 USD
Craftsman = Zip most likely

Kinda what I figured. The prices for 10-10As on eBay vary greatly. My Highlander gets good gas mileage, but it would be better if I have a reason to be in that neck of the woods. Good news for me is the guy hasn't had any other calls on the saws.
 
Kinda what I figured. The prices for 10-10As on eBay vary greatly. My Highlander gets good gas mileage, but it would be better if I have a reason to be in that neck of the woods. Good news for me is the guy hasn't had any other calls on the saws.

Looked at the pics again, and the 10-10 looks a lot better than the one I gave 70 USD for at a pawn shop. But, I was stupid.

The 610 would go for 60-70 on evilbay easy. Caution: They weigh over 18# powerhead only.

Everybody needs a 10-10.
 
Pioneer 1074 - Grand Haven, Mi $80

Pioneer Chain Saw. Model 1074 | Grand Haven | eBay Classifieds (Kijiji) | 8764876

0041c59_27.jpeg
 

Latest posts

Back
Top