samaritan
ArboristSite Operative
I've replaced 3 , what's the best way to check em?coils in my saw this year, I'm wondering if the magnets are good yet on my ms251c
Is this flywheel good?
- Thread starter samaritan
- Start date
Help Support Arborist Forum:
When I worked with toner cartridges for laser printers, we used a gauss meter to check strength of magnets used in the cartridges. Maybe start checking magnets on every saw you work on and create a database of readings for reference?
https://www.bing.com/search?q=gauss...ge.0.0l9.4366j0j1&pglt=43&FORM=ANNTA1&PC=LCTS
https://www.bing.com/search?q=gauss...ge.0.0l9.4366j0j1&pglt=43&FORM=ANNTA1&PC=LCTS
- Joined
- Dec 6, 2014
- Messages
- 21,221
The only reason folks need to replace flywheels are when they damage them trying to remove them. I have never experienced the "magnet-loss" thing. I believe it is called a "red-herring".
You have replaced the flywheel on one saw three times?
Or in your lifetime of working on saws you have only had to replace three flywheels?
Those poly wheels on late 066 or 660's can do funny things.
Busted off fins are pretty common in farmer saws I see- escaped bolts falling into the recoil at WOT are usually responsible.
Coil rub can upset magnets........ but for them to just go bad for no real reason- not usual.
Have seen 2 660 poly wheels lose magnetism for no reason.
Spark one day,none the next
Both had 1 weak magnet.
Spark one day,none the next
Both had 1 weak magnet.
- Joined
- Dec 6, 2014
- Messages
- 21,221
Usually it turns out the guy was testing for spark by spinning the crank with a drill.
Not fast enough to test.
Not fast enough to test.
It helps if you unscrew the plug and ground it to the cylinder so the drill isn't fighting the saw's compression.
That's not testing for anything. A spark tester needs to be hooked up to the high tension lead to properly load the ignition system. Even a 3/4 shot coil will fire a spark plug in open air.
samaritan
ArboristSite Operative
I've replaced the coil 3 times
3 X genuine Stihl coils- or 3 X aftermarket PRC coils?
samaritan
ArboristSite Operative
Aftermarket crap, never again though
An old farmer trick is to open the plug gap up ~1/4". If the coil jumps that they are usually good.
That's better then nothing.
Spark plug.
i thought the old farmer trick was to get their kid to put their tongue on the plug term.
or was that for testing electric fences?
The best ignition tester I have is a non extended tip sparkplug with the side electrode cut off and an alligator clip welded to the side. If it sparks, it will start, unless the flywheel key is sheared.
That style only works on certain ignitions, as evidence of Briggs and Stratton have 4 different versions for different ignition systems. An adjustable gap spark tester is all you will need, cheap and can test any ignition system made.
