The Jonsereds 62 is a 56cc saw made for only two years - 1969-1970. This saw is the predecessor to the 621, and they seem to be fairly rare, especially compared to the 621.
I sourced this one when I was living in Italy; I believe it came from my friend Niklas in rural northern Sweden, but I'm not positive. It's just been collecting dust on my shelf for about 7 years, so it's time to move it on down the road.
It has 198 psi compression, so she's plenty stout. Saw has spark. It should run on a prime, or it might be a run off the tank, but I'd plan to rebuild the carb and replace the fuel lines first.
Comes with what I believe to be an original Jonsereds roller tip bar, but the roller is damaged. No chain. These take the same bars as a 621, so replacement bars are easy to find.
Clutch cover on the saw is damaged, but I'm including a nice replacement one with similar patina.
$200 + shipping from zip 78248.
I sourced this one when I was living in Italy; I believe it came from my friend Niklas in rural northern Sweden, but I'm not positive. It's just been collecting dust on my shelf for about 7 years, so it's time to move it on down the road.
It has 198 psi compression, so she's plenty stout. Saw has spark. It should run on a prime, or it might be a run off the tank, but I'd plan to rebuild the carb and replace the fuel lines first.
Comes with what I believe to be an original Jonsereds roller tip bar, but the roller is damaged. No chain. These take the same bars as a 621, so replacement bars are easy to find.
Clutch cover on the saw is damaged, but I'm including a nice replacement one with similar patina.
$200 + shipping from zip 78248.
Attachments
-
IMG_0106.jpg1,019.1 KB · Views: 0
-
IMG_0107.jpg1.1 MB · Views: 0
-
IMG_0108.jpg1.2 MB · Views: 0
-
IMG_0109.jpg929.3 KB · Views: 0
-
IMG_0111.jpg1.1 MB · Views: 0
-
IMG_0110.jpg766.9 KB · Views: 0
-
IMG_0105.jpg468.4 KB · Views: 0
-
IMG_0102.jpg600.4 KB · Views: 0
-
IMG_0113.jpg570.4 KB · Views: 0
-
IMG_0115.jpg671 KB · Views: 0