Jonsereds ??????

[Pcoz88]

Are they going to come out with a bigger saw then the 2186 any time soon or ever???:yoyo: :yoyo:

 

[HiOctane]

I dont know if they gonna come with bigger engine,but you can have larger in Husky with the 395 or 3120.

 

[Austin1]

Bigger Jred

If I remember right Jred used to sell a bigger saw than the 2186. But they only sold it with the mill you had to get both. I no longer see them selling mills in Canada but I am sure some of our Scandinavian readers would know more about this. And I don't mean the older real Jreds but a newer 21# something saw.

 

[Esbjug]

If I remember right Jred used to sell a bigger saw than the 2186. But they only sold it with the mill you had to get both. I no longer see them selling mills in Canada but I am sure some of our Scandinavian readers would know more about this. And I don't mean the older real Jreds but a newer 21# something saw.

I have checked both the Swedish and Norwegian Jonsered pages, but the 2186 and 2186WH are the largest saws found. The Jonserd saw mill was not on the web page, but I wonder if that mill is sold by some other company.

I found some info in Norwegian, but at least you Americans can see the pictures and model type. In 2005, the mill was in the info. Perhaps productions ended after that.

http://www.bjerknes.no/produkt.php?s_id=2&k_id=19&u_id=10128&p_id=0&d_id=1&sub=1


http://www.bergs-serviceverksted.no/downloads/Jonsered_Sag.pdf

 

[Austin1]

I have checked both the Swedish and Norwegian Jonsered pages, but the 2186 and 2186WH are the largest saws found. The Jonserd saw mill was not on the web page, but I wonder if that mill is sold by some other company.

I found some info in Norwegian, but at least you Americans can see the pictures and model type. In 2005, the mill was in the info. Perhaps productions ended after that.

http://www.bjerknes.no/produkt.php?s_id=2&k_id=19&u_id=10128&p_id=0&d_id=1&sub=1


http://www.bergs-serviceverksted.no/downloads/Jonsered_Sag.pdf

I think you are right it was about three years ago I seen them at my Jred dealer. For some reason 2095 strikes a bell with me.

 

[Big Woody]

The 2095 was discontinued due to not meeting EPA regs. I was told by a dealer.
At the time you could by the 2095 by itself, or with the mill.

Last year I knew a dealer that had a 2095 left so there are still some new ones around if you know where to look.

 

[gunnarfan]

there was the 2094 and the 2095 and i know they have both been discussed around here. thats sawtroll territory.

the mill i know that you can get is the mini jobber. very versatile.. not just a slabber. about 1100 US.. distributed by tilton/jonsered dealers.

i'm very content with my 111s. around here the biggest thing for 800ish i can get is a solo 694. no one has traded in a big jred in a while.

i know the electrolux motors are in both the husky and the jred so we can say that we can get what we want from either.. but its just not the same.