Jugs........Rare & Different

[Mastermind]

And the funny part David.........I'm getting faster at doing them. I might have spent 30 minutes adding the fingers on each of those jugs.

An 064, and a 288XP BTW.

 

[Fire8]

How do you determine where to put the fingers and does it matter how wide, depth,and angle

 

[Mastermind]

The thickness of the jug determines depth.......width is the size of my burr. Placement is determined by the piston skirt, and pin location.

 

[Fire8]

So why are some finger ported and most are not

 

[Mastermind]

I just do what the customer wants.

 

[Mastermind]

Here a picture that shows the finish in the 066 KS intake spigot......very nice, no casting lines.

 

[glezen's power equipment]

Those really ain't that hard to come by........but this is pretty tough to find these days.

View attachment 396411

View attachment 396413

View attachment 396415

View attachment 396416

View attachment 396417

This is the 2100cd piston and cylinder that I sold last week!! Pretty cool to see it on here and in one of the best sawmaker's hands possible. We are just a little rinky dink Husqvarna and Stihl dealership that had no idea the amount of people looking for all this old stuff!! Also we started in Poulan and have tons of Echo too. Pm me if your interested. This sit is awesome!

 

[Uzi]

Hey Dan glad you found this place and that definitely is the piston and cylinder you sold me. Be careful around here though you'll end up buying more saws and parts instead of selling them. I came here with 2 saws thinking I'd part one out ended up fixing it and now I'm up to 8.

 

[Sty57]

Just bridge ports....

You're right Mike.

I blasted one of the others to.

What are you using for blasting media?
Glass, Walnuts....
I have been using a really fine glass for most stuff, just wondering what works the best.

 

[glock37]

36 grit black beauty. Need surface for powder to stick .


Sent from my iPhone using Tapatalk

 

[David Young]

Husky 42 special 242xp 246

 

[David Young]

 

[David Young]

I know these are not rare but I wanted to show. The 42 special and 246 look the same but have a 42 bore and 44 bore respectively. Out of all three jugs the 42 spec has the largest comb chamber.

 

[Tractorsaw1]

Funny how that finger/split in the transfer port jug is a spitting image of the poulan 365/380 jugs

 

[Mastermind]

What are you using for blasting media?
Glass, Walnuts....
I have been using a really fine glass for most stuff, just wondering what works the best.

I use 80 grit black beauty.

Funny how that finger/split in the transfer port jug is a spitting image of the poulan 365/380 jugs

Same manufacturer. Gilardoni

 

[JDNicol]

NOS 2100 thin ring

NOS Stihl Contra/Lightning not an "S" unfortunately.

This is pretty cool too. Used OEM Stihl 051 piston made by Vertex . Not rare but uncommon.

 

[bullseye13]

I have a used Stihl 075 prototype cylinder with removable head used in testing the 075 upgrade to the 050 case prior to official manufacture.

 

[David Young]

well......
lets see it

 

[Mastermind]

075/076......I don't port those.

Not anymore.

 

[David Young]

075/076......I don't port those.

Not anymore.

how come? not alot of gains? I thought your motto was "hell, I'll port a toaster if you leave it with me long enough