log splitter second chance.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
whiting-5

whiting-5

ArboristSite Operative
Joined
Oct 23, 2008
Messages
190
Location
grundy co tn
have a huskee 35 ton log splitter that i bought from tractor supply few years back that i hate.why do i hate it ? because of the 12 hp briggs engine and the amount of kick back it would yank the pull cord out of your hand when starting.its hurt me and both of my boys. i was so fed up with it i was going to sell it.but then i found a guy that works on lawn mowers and such and has a junkyard of parts laying around long story short he had enough parts laying around to switch it over to electric start.and let me tell you this is the way to go.it has made life so easy it fires right up even when frezzing cold outside.if huskee would have made this to start what a concept.i know they must have had complaints because there new 35 ton splitters use different design now.just wanting to let guys know with this splitter there is hope .
 

iowa

Addicted to ArboristSite
Joined
Dec 27, 2008
Messages
1,606
Location
Billings, Missouri
I have a new Swisher 28ton with a Briggs 10.5 hp engine. It won't kickback, but it's a bear to start. It's not broke in yet and it's tuff to pull. It has a deal to disengage the pump which makes it better. But still!!!!
 
Storm56

Storm56

NOT blinded by brand...
Joined
Dec 3, 2009
Messages
589
Location
N E PA
My splitter has the Honda motor, no electric start but rarely more than 2 pulls. And it has never pulled back on me. Not as good as electric start, but no battery to maintain!
 
whiting-5

whiting-5

ArboristSite Operative
Joined
Oct 23, 2008
Messages
190
Location
grundy co tn
My splitter has the Honda motor, no electric start but rarely more than 2 pulls. And it has never pulled back on me. Not as good as electric start, but no battery to maintain!

ive had honda 13 hp. pull start and never had any problems either. but this briggs engine is a beast!poor design in my opinion the two deals that are in the recoil housing that shoot out when you pull the handle are cheap plastic.ive tried pulling it through so its not on compression stroke when pulling but it will still bite you.a pump disengage sounds like a good idea:clap:i changed the hyd. oil to dextron that made it a little easier but still a pain when its cold.i talked to a guy at a lawnmower shop that use this engine on some big walk behind mowers and he says that pull starting was the number 1 complaint. i would rather maintain a battery and have a splitter that works easily than fight the S.O.B. i will get some pics and post them tommorow.
 
Top