bayshorecs
ArboristSite Operative
In the middle of installing the 84cc BB kit from Bailey's. The squish has me concerned though.
Before I stripped it down, the squish on the stock jug measured .025 and 175psi cold. I have the new jug installed with ring and gasket (fuel rated) sealant for no base gasket. The squish is .042 with no base gasket. After about 1 minute of running, the compression was 160psi. The piston arrow is facing the exhaust port.
Not much to mess up so maybe the new jugs from bailey's are a little too tall? Certainly glad I did not put the base gasket in now.
Before I stripped it down, the squish on the stock jug measured .025 and 175psi cold. I have the new jug installed with ring and gasket (fuel rated) sealant for no base gasket. The squish is .042 with no base gasket. After about 1 minute of running, the compression was 160psi. The piston arrow is facing the exhaust port.
Not much to mess up so maybe the new jugs from bailey's are a little too tall? Certainly glad I did not put the base gasket in now.