Kidneycutter
Kidneycutter
Acquired this saw as part of a job lot. It had a few problems but mostly it won’t accelerate. vacuum pressure check …perfect. put a repair kit in the carb nothing. change the plug reset the flywheel still the same.
anyway the carb has a red plastic limiter on the high jet. i Removed this cleaned out the jet and retuned and it works perfectly. The limiter had been butchered and came out in bits. The question is will the jet move without the limiter . I did try to put a spring on but it only has a short thread.
anyway the carb has a red plastic limiter on the high jet. i Removed this cleaned out the jet and retuned and it works perfectly. The limiter had been butchered and came out in bits. The question is will the jet move without the limiter . I did try to put a spring on but it only has a short thread.