sld961
Addicted to ArboristSite
Congrats to all of the winners, and well done to everyone that donated prizes and to everyone that contributed. God bless!
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
Ms461 Raffle for breast cancer
- Thread starter Paragon Builder
- Start date
Help Support Arborist Forum:
- Joined
- Dec 4, 2016
- Messages
- 1,815
- Reaction score
- 2,779
That's beautiful Dan. I hope today is the first day of many better days ahead for your friends.
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
Thanks Chris!
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.
3 @Sleeper
4 @huskihl
5 @dieselfitter
6 @Moparmyway
7 @Ryan Browne
8 @huskyboy
9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
1. Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
3. Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
6. Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
8. Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
10. Woods port from @Mastermind
11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
15. Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave
And I'll put my [emoji41] in front of completed items.
3 @Sleeper
4 @huskihl
5 @dieselfitter
6 @Moparmyway
7 @Ryan Browne
8 @huskyboy
9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
1. Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
3. Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
6. Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
8. Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
10. Woods port from @Mastermind
11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
15. Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.
4 @huskihl
5 @dieselfitter
6 @Moparmyway
7 @Ryan Browne
8 @huskyboy
9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
1. Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
3. Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
8. Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
10. Woods port from @Mastermind
11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
15. Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave[/QUOTE]
And I'll put my [emoji41] in front of completed items.
4 @huskihl
5 @dieselfitter
6 @Moparmyway
7 @Ryan Browne
8 @huskyboy
9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
1. Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
3. Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
8. Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
10. Woods port from @Mastermind
11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
15. Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave[/QUOTE]
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.
8 @huskyboy
9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
[emoji41]3. (5 @dieselfitter) Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
10. Woods port from @Mastermind
[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
15. Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave
And I'll put my [emoji41] in front of completed items.
8 @huskyboy
9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
[emoji41]3. (5 @dieselfitter) Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
10. Woods port from @Mastermind
[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
15. Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
[emoji41]3. (5 @dieselfitter) Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind
[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave
And I'll put my [emoji41] in front of completed items.
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
[emoji41]3. (5 @dieselfitter) Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind
[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
Jon1212
Riff Raff Fart Knocker from other Forum's.
Bueller?......Bueller?.......anyone?
Don't get in a hurry, you're number 20. You may get a Poulan woodshark sticker, depth gauge or preset for .404 chain. Of course it is better than JJ at number 30! Heck I didn't make the cut.
D
Deleted member 149229
Guest
But you still won by your charitable act of kindness! Priceless.
Leerod83
ArboristSite Operative
12
Sorry for the hold up
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
No worries, thank you for your support!
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
[emoji41]3. (5 @dieselfitter) Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind
[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
[emoji41]12. (10 @Leerod83)
NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave[/QUOTE]
And I'll put my [emoji41] in front of completed items.
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]
[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
[emoji41]3. (5 @dieselfitter) Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder
7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS
[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.
[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind
[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.
[emoji41]12. (10 @Leerod83)
NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws
[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @Dahmer on AS
[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave[/QUOTE]
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
- Joined
- Dec 4, 2016
- Messages
- 1,815
- Reaction score
- 2,779
At this point I would be happy with a blade groove cleaner or a cherry flavoured chapstick for hunting season lol.
Thanks for the great effort Paragon, Malk and all the others made for this cause.
Please pass mine on down the line.
Please pass mine on down the line.
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
Thank you very much for your support!
D
Deleted member 149229
Guest
You're a very cheap date.
Paragon Builder
AS Enthusiast
- Joined
- Nov 27, 2014
- Messages
- 3,029
- Reaction score
- 3,078
Raffle is over but jon1212 won #16 the stihl 015 and is auctioning it off to raise a little more money for my friends.
Bidding is up to $210 if anyone is interested.
Bidding is up to $210 if anyone is interested.
