Sticking with your theme you could get an 088 fairly reasonable and even go the other way and find a decent 015, 011, or 009. Most of those older saws are still highly sought after and you would be surprised at the power and quality in those smaller saws. I own 2 084aveq's which were fore-runners of the 088. There had been some issues with overheating as I recall, but if you clean them properly after every use, keep your mixture correct and don't tweak the high end mixture screw too lean you won't have any problems. The 084 is however getting very hard to find some parts for, so you may want to rule that one out. An older saw that may be a good possibility as they are still around are the 056's. These are fine saws and plenty of them still left around.