I've got the biner to the D, then the flip line through the swivel you then tie your prussic outside of the swivel using a Distel? Excuse me I'm frying whats left of brain with this. I originally pictured the knot on the inside with the tail of the flip line hanging out of the hole in the swivel.
I know we can rectify this! LOL
ok. because i dont know how to operate my computer i can not download any pics to show you. so here's what i am going to attempt to do, write out what it looks like to me.
clip the captive eye swivel biner to your left d ring.
clip dead ended biner/rope snap to right d ring.
go around tree/pole/whatever you want to use to pretend you are tied in and almost ready to lean back with the rope and then slide it through (from front to back) into the captive eye.
now you are looking down at the rope going through the eye.
tie the distel to the rope. tie set dress the knot.
on either side of the rope, tie a scaffold/doublefisherman knot TO the captive eye with your prussic. i am using HRC from new england rope. obviously not spliced.
try to take away as much of the distance from the eye to the knot as you can, i have about 3 inches of play in mine.
bang. there it is. from my mind's eye to yours.
now if you really want. go to the buzz and look for a thread started by tom d with captive eye swivel biner flipline in it.