New MS880 on version C

[Beer Gut]

@splitpost

What do u change on ur 880?
You rpm without load

I tuned by ear, check with tach, and tested in wood which is how I ended at 12k it sounded good at WOT and cut fine in smaller wood. Once I cut in stuff bigger than 36in it seemed week. I used tach to back it down to 11500. At WOT more roar and in heavy cut power band spot on like in video.

 

[splitpost]

Hey guys ,I can't remember the finer details but it is all in the thread we had going,yes I used the early 441 coil ,084 carb and 088 boot ,it also has a husky deflector on the outer muffler cover ,it really made a big difference over stock ,hey BG how you been mate

Sent from my SM-N910G using Tapatalk

 

[ferris076]

I tuned by ear, check with tach, and tested in wood which is how I ended at 12k it sounded good at WOT and cut fine in smaller wood. Once I cut in stuff bigger than 36in it seemed week. I used tach to back it down to 11500. At WOT more roar and in heavy cut power band spot on like in video.

@westcoaster90
What do u think about that?
A richer mix with more power?

 

[Big_Wood]

@westcoaster90
What do u think about that?
A richer mix with more power?

i think it's all in his head lol

 

[ferris076]

So u think, he only belive the saw has less Power?

 

[Beer Gut]

Hey guys ,I can't remember the finer details but it is all in the thread we had going,yes I used the early 441 coil ,084 carb and 088 boot ,it also has a husky deflector on the outer muffler cover ,it really made a big difference over stock ,hey BG how you been mate

Sent from my SM-N910G using Tapatalk

Split and I did this together. Everything the same except carb and boot. That thread is long. Mine is optimized his is optimized and modified. He got more RPMs.

 

[Beer Gut]

Split and I did this together. Everything the same except carb and boot. That thread is long. Mine is optimized his is optimized and modified. He got more RPMs.

@splitpost do you still have your 880?

 

[splitpost]

@splitpost do you still have your 880?

Sure do

Sent from my SM-N910G using Tapatalk

 

[Beer Gut]

Sure do

Sent from my SM-N910G using Tapatalk

What is your tune might keep going with 88 carb and 84 boot

 

[splitpost]

What is your tune might keep going with 88 carb and 84 boot

Can't remember,haven't used that saw for probly six or so months ,I'll tach it when I get home in a week ,,if you can find that old thread it should all be there ,haven't changed it any

Sent from my SM-N910G using Tapatalk

 

[ferris076]

@Beer Gut @splitpost

This Thread?
https://www.arboristsite.com/commun...runs-with-361-unlimited-coil-it-works.242198/

 

[splitpost]

@Beer Gut @splitpost

This Thread?
https://www.arboristsite.com/commun...runs-with-361-unlimited-coil-it-works.242198/

Yeah that's one of them

Sent from my SM-N910G using Tapatalk

 

[splitpost]

Yeah that's one of them

Sent from my SM-N910G using Tapatalk

Here's the other https://www.arboristsite.com/community/index.php?threads/194391/

Sent from my SM-N910G using Tapatalk

 

[ferris076]

@Beer Gut @splitpost

Both of u are using 441 coils right?
Do u advance the timing?
Or du u use the stock key?

 

[Beer Gut]

@Beer Gut @splitpost

Both of u are using 441 coils right?
Do u advance the timing?
Or du u use the stock key?

Yes, ORIGINAL 441 coil, and no didn't have to change timing.