My Swisher 34 Ton commercial splitter should arrive early next week
The manual says to use 10 Micron filters, but the ones from Swisher are $19 + Shipping, stupid expensive... I looked up others and came up with: (Other reason is I'd like to use Amazon Prime 2 day for parts if I can)
- WIX 51551MP
- Baldwin BT839-10 (-10 = 10Micron Version)
My concern is that the WIX "Technical" page shows max flow as 12-16GPM while the log splitter is rated for 22GPM in Stage 1.... seems like I'd be slowing it down due to a small / improper filter?
Of course it's not "their" filter, but maybe I'm missing how different labels on the filter let them run at higher GPM ??
Anyone have any experience with this splitter and/or limitations by the filter element on GPM? I'd like to make sure I get most out of it as possible
Any other tips/tricks for those who have this splitter or mods you made to it to make it even better
The manual says to use 10 Micron filters, but the ones from Swisher are $19 + Shipping, stupid expensive... I looked up others and came up with: (Other reason is I'd like to use Amazon Prime 2 day for parts if I can)
- WIX 51551MP
- Baldwin BT839-10 (-10 = 10Micron Version)
My concern is that the WIX "Technical" page shows max flow as 12-16GPM while the log splitter is rated for 22GPM in Stage 1.... seems like I'd be slowing it down due to a small / improper filter?
Of course it's not "their" filter, but maybe I'm missing how different labels on the filter let them run at higher GPM ??
Anyone have any experience with this splitter and/or limitations by the filter element on GPM? I'd like to make sure I get most out of it as possible
Any other tips/tricks for those who have this splitter or mods you made to it to make it even better