Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[Hedgerow]

The muffler on the 962 of Kenneth's was pretty open... So it got another port today... Made some improvement, but not a ton like some other models... I figure about 5% according to the cut times...
It's a start... About 25% to go...
:msp_rolleyes:

 

[Work Saw Collector]

Got it tore down. Oiler gear came apart. Got the new one, but cant figure out if there is a seal or not. The old worm gear part had a seal around it. The new one doesnt. Need an 084 expert really bad. Anybody??

I don't have a IPL for a 084 got one for a 088 it shows an oring between the pump and case.

 

[Work Saw Collector]

I don't have a IPL for a 084 got one for a 088 it shows an oring between the pump and case.

Les I misread your post, your talking at the gear not the pump to case?

 

[logging22]

Les I misread your post, your talking at the gear not the pump to case?

Right. Under the plastic gear over the metal worm thingy.

 

[Work Saw Collector]

Right. Under the plastic gear over the metal worm thingy.

Yep a 088 shows a seal there. If it is the same as a 084

Part number 9643 003 0910

Part Name: Sealing ring 10x14x3

 

[logging22]

Yep a 088 shows a seal there. If it is the same as a 084

Part number 9643 003 0910

Part Name: Sealing ring 10x14x3

Sweet! Thanks a bunch Stephen!

 

[Work Saw Collector]

Sweet! Thanks a bunch Stephen!

A little more searching on the net, that part fits the MS880 MS780 088 084

 

[Stumpys Customs]

Got it tore down. Oiler gear came apart. Got the new one, but cant figure out if there is a seal or not. The old worm gear part had a seal around it. The new one doesnt. Need an 084 expert really bad. Anybody??

This is all the help I got.
http://thebakeliteradio.com/sawspares.com/Stihl 084 IPL.pdf

 

[Work Saw Collector]

This is all the help I got.
http://thebakeliteradio.com/sawspares.com/Stihl 084 IPL.pdf

Yep same part number on that IPL also.

 

[Work Saw Collector]

Well all you guys ran off and left me up by myself so I been having fun in other threads. :msp_wink:

 

[Hank Chinaski]

Well all you guys ran off and left me up by myself so I been having fun in other threads. :msp_wink:

there's other threads here?

 

[Hedgerow]

there's other threads here?

Yep, but this one goes on all the time... It's the AS coffee shop...
:msp_biggrin:

 

[Stumpys Customs]

The best way to make coffee

 

[Hedgerow]

​

The best way to make coffee

Mmmm... River coffee...:msp_wink:

 

[wendell]

Two of your members are here having.a.smoke off. Poor Jim is a little cold. We haven't gotten him out of the shop yet.

 

[mweba]

The best way to make coffee

Now I know jim isn't there...he's right behind me

 

[atvguns]

Angus thick burger from Hardee's :msp_thumbsup: Next time I will splurge and get some bacon on it.

 

[logging22]

Angus thick burger from Hardee's :msp_thumbsup: Next time I will splurge and get some bacon on it.

What?? No bacon?? What is the world coming to?? Bad rabbit, no biscuit.:bang:

 

[plumbcrazyjr]

mushroom and swiss only way to go
also id like to thank all those who kept my grandfather in there prayers and thoughts as the unbelieveable happened when they went to remove the tumor it was found to be noncancerous and not attached to anything it was a very easy removal with no after effects
Thank you all so very much

 

[andydodgegeek]

Glad to here of your grandfather and I agree mushroom and swiss, MMM.