Well, my youngest came home the other night with a Yamaha Blaster. Only problem it has is a shot engine. Rod through the block. Anybody know of a junk one with a rebuildable engine? He only gave a hundred bucks for it, so he's not hurt. Also picked a Yamaha Warrior, for nothing. We got it to start and run. So far it needs to have the rear axle bearings looked after. Lots of play. At first he thought of swapping the engine into the blaster, but it would take a HUGE amount of cutting and welding and fabricating. Looks like he's going to just fix both. Then he and his buddy can go to the national forest and go riding quads.
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Buy him a helmet and make him wear it!
Helmet, always!!!
Homelite410
Hack with a CNC Mill
Good evening all, I need your help. I need a spindle out of a big heavy grooming mower. I don't care what kind I don't care what bran I don't even care of the bearings are good I need the spindle complete. Please let me know if you know where I can find one. I have my heart set on a 272 John Deere finishing mower spindle.
shorthunter
ArboristSite Guru
Put a CRF150 engine in that blaster
WKEND LUMBERJAK
Addicted to ArboristSite
It sure is cooling off nice out side. It was a nice evening too grill with my family for fathers day.
Nice? Hell, it's still ninety one in my back yard.
Didn't go pontooning with the kids. Too freakin hot!
Didn't go pontooning with the kids. Too freakin hot!
Hedgerow
HACK
It's Father's Day?It sure is cooling off nice out side. It was a nice evening too grill with my family for fathers day.
Hedgerow
HACK
Spent a couple hours making Levi a chain for his saw..
Seems sharp..
WKEND LUMBERJAK
Addicted to ArboristSite
Have to go to my wife's parents tomorrow. Did my folks this evening.
Homelite410
Hack with a CNC Mill
I'm cooking some southern Missouri Steer tomorrow.
WKEND LUMBERJAK
Addicted to ArboristSite
That is sharp. That will wake up that 025.
Hedgerow
HACK
Me too...
Right after I get back from the lake..
Hedgerow
HACK
Knocked bout .7 seconds off the cut time..That is sharp. That will wake up that 025.
Still need a little more, and not sure what to tell him..
WKEND LUMBERJAK
Addicted to ArboristSite
same carb?
Hedgerow
HACK
Yup.
Scott Kelly
Silverpsd_06
Could you weld and machine the whole top of the piston to tighten squish since its still stock im guessing.. maybe a pop up
Homelite410
Hack with a CNC Mill
Stretch the rod Matt.
Hedgerow
HACK
In hole big, out hole big... Carb mods made a difference on this one, which tells me he needs a tick more..
Hedgerow
HACK
In a saw you want fast, I'm just not sold on huge compression..
Just gotta have enough..
Just gotta have enough..
