Pioneer chainsaws
- Thread starter WesternSaw
- Start date
-
- Tags
- operator manual
Help Support Arborist Forum:
Carb kit for a Farmsaw with the Tillotson HS carb,
http://store.chainsawr.com/products/tillotson-hs-carburetor-kit
awesome thanks.
Can anyone help me out with the carb linkage pic? I want to get her running for a GTG on May 3rd.
Which saw?
'59 610
There is only the one link that connects the throttle arm to the HL carb. Are you missing that link?
I'll post a pic of what I've got later in the day. I do have the one arm but it doesn't look right to me.
There are two arms, one for the manual oiler and one for the throttle. I will look in my albums to see if I have a pict tucked away from a rebuild.
Here is a few pics of my issue.
The linkage arm isn't close and I'm sure I didn't bend it when removing the carb. That last pic I held the throttle about where I thought it should be.
The linkage arm isn't close and I'm sure I didn't bend it when removing the carb. That last pic I held the throttle about where I thought it should be.
yer just missin a bent piece of 1/16" wire/rod, basically... if pioneerguy doesn't find any pics, I would take some tomorrow, so you can see how its bent & length... edit: don't bend that lever/arm...
Exactly what I thought! I know I didn't loose anything but I need a picture to find what I'm looking for (my bench is a mess). Thanks for the reply and I will really appreciate the pic. I'm so close but so far!
its an inch or so long maybe 1 1/8-1 1/4, one end will have a single 90 bend, the other, 2 opposing 90's... the single 90 goes in the throttle lever/arm. will need to slide carb back to get it in...
it could be under carb on fuel tank...
Love the H.S. mix screw on them. Easy adjust 'on the go'. Wish all of them had a handle.
if its a pioneer farmsaw i can snag some pics after work. let me know.
I am very grateful pioneerguy!!! I've looked around a couple times but now that I see it, I may have more success. Thank you!!
You are welcome, hope you find it. If not send me a PM.
mine is bent differently, maybe homemade, works...
