S saleshound New Member Joined Jun 30, 2021 Messages 1 Reaction score 0 Location Sherrills Ford NC Mar 6, 2022 #1 Can anyone give me some direction on removing the flywheel on a P26 Pioneer? It looks like I may need a special tool?
Can anyone give me some direction on removing the flywheel on a P26 Pioneer? It looks like I may need a special tool?
Vintage Engine Repairs Addicted to ArboristSite . AS Supporting Member. Joined Aug 12, 2019 Messages 5,307 Reaction score 7,686 Location Australia Mar 15, 2022 #2 I’m not sure on that exact model, but a few taps with a brass hammer on the crank stub should loosen it. If you can get a screw driver behind the flywheel that helps. Make sure the flywheel nut is on and flush with the end of the stub. Only brass or softer.
I’m not sure on that exact model, but a few taps with a brass hammer on the crank stub should loosen it. If you can get a screw driver behind the flywheel that helps. Make sure the flywheel nut is on and flush with the end of the stub. Only brass or softer.