Post pictures of your woodpile/splitting area

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Jakers

Jakers

Owner - Arbor Jake's Tree Service, LLC
Joined
Jan 5, 2012
Messages
2,340
Location
Fergus Falls, MN
OK - this is probably a flaming newbie type question, but how come all the wood I leave outside to season turns dark so quickly, and all you guys have stacks of such clean, pretty wood? Maple, oak, polar, ash, box elder, lilac, etc. - does not seem to matter what species.

Mold? Mildew? Acid rain? UV rays? Diesel exhaust? Ant poop? Fluoride in the city water? . . . .

It still burns and heats the stove, but I would have trouble selling it if I was in that business.

Just curious.

Thanks.

Philbert

i never stack my wood. just throw it in a pile. the outside pieces do fade but after i move a few the inside ones are as purdy as the day theys split. all are well seasoned and burn fine for me
 
zogger

zogger

Tree Freak
Joined
Nov 23, 2010
Messages
16,456
Location
North Georgia
Its the sun and rain. If you stack in a shed or 3 rows deep. The non exposed wood is very bright but dry.

Yep! My stacks are three rows deep, top covered. Outside chunks turn gray, inside row does not.

Eventually though, they would. I have seen and burnt 15 year old dried wood from way back in a woodshed, completely gray, clanged the most metallic, burnt like crazy. Cant tell ya, dont remember, but maybe they were six or so rows back in there to the middle. I know I climbed over the top to just get back there and snag a few pieces to try them out.

I know I would have entered them into a worlds best firewood contest, if such a contest was to be there. Not sure what species, but burnt like nothing else I ever saw that wasnt coal.
 
ReggieT

ReggieT

Addicted to ArboristSite
Joined
Apr 15, 2012
Messages
1,869
Location
North Alabama
Hmm...that makes fer a mighty fine castle for all kinda species of critters around my way!:vampire:

Nothing wilder & more comical than chucking an arm load of wood into the fireplace...and a few minutes later you see a chunky gopher all pissed off bailing outa there!!!:waaaht:

Is that a "California Approved" method of stacking? :laugh:
 
Dalmatian90

Dalmatian90

Addicted to ArboristSite
Joined
Sep 11, 2008
Messages
6,916
Location
Northeastern Connecticut
My wood pile from six days and six pages ago:
PC241968_small.jpg


And...this morning:
PC300001_small.jpg


There's still more wood to split behind the stacks and below the fresh, white dirt.
 
Bagster

Bagster

New Member
Joined
Apr 5, 2012
Messages
4
Location
Varysburg NY
First picture post

Hey guys!

Really enjoy the forums!

Heres a shot of my view from the bedroom yesterday.
24 foot long double wide rows, 5 feet high with 40 inch aluminum printing plates for keeping most wet stuff off.
The piles between the trees are only single row deep.

In reply to an earlier post about coloration, I recently had some 30 year old cherry donated to me from someones basement and it was still dark red and burned excellent.
The Cherry in my wood shed has been there for 8 months and still looks as "cherryish" as the day I put it there.
It gets pretty good sun exposure and a bit of rain when the wind blows towards it.

View attachment 270681
 
woodsroad

woodsroad

ArboristSite Member
Joined
Apr 28, 2007
Messages
76
Location
Milford Square, PA
OK - this is probably a flaming newbie type question, but how come all the wood I leave outside to season turns dark so quickly, and all you guys have stacks of such clean, pretty wood?

I split only at night, under total darkness, to avoid UV damage to the splits. The wood is then stacked and stored in an underground vault, in a nitrogen environment, in total darkness, at 20% humidity until it is ready to be burned. I will, on occasion, move all of the finished splits out of doors and take a few pictures. But the wood is quickly returned to the storage vault, where each piece is inspected and any needed repairs made before undergoing gamma ray sterilization and another nitrogen flush.

A few cords are pulled from the stores, sanded and finished with a BLO/beeswax concoction. It usually takes about four coats, with intermediary hand buffing, until the wood looks "right". This wood is then left on display next to the stove, or in a neat stack that is visible from the street.

I used to be more obsessive about the whole thing, but this is the process that I've settled on.
 
beerbelly

beerbelly

Mouth breather
Joined
Nov 29, 2012
Messages
11,221
Location
I don't know.
I split only at night, under total darkness, to avoid UV damage to the splits. The wood is then stacked and stored in an underground vault, in a nitrogen environment, in total darkness, at 20% humidity until it is ready to be burned. I will, on occasion, move all of the finished splits out of doors and take a few pictures. But the wood is quickly returned to the storage vault, where each piece is inspected and any needed repairs made before undergoing gamma ray sterilization and another nitrogen flush.

A few cords are pulled from the stores, sanded and finished with a BLO/beeswax concoction. It usually takes about four coats, with intermediary hand buffing, until the wood looks "right". This wood is then left on display next to the stove, or in a neat stack that is visible from the street.

I used to be more obsessive about the whole thing, but this is the process that I've settled on.

Beeswax!!!!! Thats the step I missed...how could I be so careless??? I suck!
 
Philbert

Philbert

Chainsaw Enthusiast
. AS Supporting Member.
Joined
Nov 25, 2006
Messages
19,745
Location
Minnesota
I split only at night, under total darkness, to avoid UV damage to the splits. The wood is then stacked and stored in an underground vault, in a nitrogen environment, in total darkness, at 20% humidity until it is ready to be burned. . . . .

Don't laugh! Remember the posts about the Minnesota guy getting something like $300 for a few splits of birch in New York City, because they were P-R-E-T-T-Y?

Philbert
 
Philbert

Philbert

Chainsaw Enthusiast
. AS Supporting Member.
Joined
Nov 25, 2006
Messages
19,745
Location
Minnesota
But seriously . . .

If the wood is dried in a shed, without direct sun exposure, does it keep that 'freshly split' color? Or does it have to be kiln dried?

I cut and split for my own use, so it's not a big deal. Just curious when I see all those stretch wrapped bundles at the gas station. They would not sell wood that looks like mine, due to the aesthetics.

Philbert
 
woodsroad

woodsroad

ArboristSite Member
Joined
Apr 28, 2007
Messages
76
Location
Milford Square, PA
and...needs to be from your own bees so you can have strict quality control.

Actually, the beeswax needs to have been produced within 3 miles of where the trees grew. If the bees collected pollen from the actual tree that you cut down, all the better, but you had better plant a replacement tree for the little girls. They don't cotton to people screwing with their food supply.

We also grow our own flax and press the seeds for the linseed oil, but that step is not entirely necessary.

I thought that everybody knew all this stuff already.
 

Latest posts

Top