That's what I thought. I have another spilt 3400 and may try to see how seals fit in it. At $4.25 per seal I don't want to waste too many. Thanks. I may also measure ID of case to see if both saws are differant. If so I may end up with a parts saw sans flywheel side half.
its very very very possible that ari partsmart has the wrong part #s its been known to happen before on many brands cause a typo can happen if you want to call poulan and tell them to look in there archives not partsmart but there own archives and get the part # to the correct seal tell them the part # that is showing on the partsmart parts list is the wrong part #
if you want me to i can call them tommorrow and get to the bottom of this issue i know what strings to pull to find a answer
and i believe in customer service i know i am one of them vendors you ordered from and i thank you for it i will find out what the correct part # is and will if i have them send you out 1 just to see if it works the way they looked looked like china made seals in a way could be they are making that and the rings wrong
cause i know the 3400 rings are also having the same exact problem too big of a ring
so lets see what happens
its possible part smart has the wrong parts on the websites etc.
calvin