Project Stumpbroke 346xpNE

[Stumpys Customs]

Finally got my chance at a 346xpNE. This ones gonna be fun. I got the go ahead to do some extra stuff to it.:msp_biggrin:

Here it is

The biggest small husky mount bar I have is a 20'' & it seems that that's plenty for it in stock form with this hard as concrete oak log I got.
[video=youtube_share;sEQb7KGvbss]http://youtu.be/sEQb7KGvbss[/video]

 

[Stumpys Customs]

Not bad on the comp

All cleaned up & ready for me to dig in.

 

[Stumpys Customs]

First task after recording all the stock numbers is to cut the squish band. I took .055'' off of this one. Also have to cut the base down so that I can get the squish set where I want it.

Another thing I'm doin to this one is lightening the flywheel. Was only able to shave 13 gr. of of it. I could have taken more off of the fins, but this saw lives down south & didn't want any issues with cooling.

 

[Hedgerow]

...:msp_smile:

 

[Stumpys Customs]

...:msp_smile:

Bout time you showed up. I was gettin lonely in here:msp_biggrin:

 

[parrisw]

Are we there yet?

 

[Stumpys Customs]

Are we there yet?

Almost, I'm still grindin on the ports.

Here's some more pics to keep you busy.

 

[Yukon Stihl]

Hi Stumpy
By the looks of the flywheel holder you have found some use for the remains from the old shop.
Hope you find use for some of the rest of it.
Hows the new coop progressing?
Thanks for posting pic's for use to drool over
Thomas

 

[nmurph]

Not bad on the comp

That saw has already lost a good bit of its punch. New, it will be 20-25psi higher.

 

[Stumpys Customs]

That saw has already lost a good bit of its punch. New, it will be 20-25psi higher.

Yep, it's getting a new Meteor piston kit. :msp_wink:

 

[Stumpys Customs]

Got some pics of the finished ports. I love doin these quad port huskys. :msp_wub:

 

[Adirondackstihl]

 

[sunfish]

346xp :msp_wub:

Well, Stump old buddy, it's about time! Lookin forward to the results man.

 

[Metals406]

opcorn:

 

[Bluefish]

I'm in. Russ

 

[Stumpys Customs]

346xp :msp_wub:

Well, Stump old buddy, it's about time! Lookin forward to the results man.

Yes it is. Didn't know if I'd ever get a chance at one. :msp_sad:

 

[sunfish]

Yes it is. Didn't know if I'd ever get a chance at one. :msp_sad:

I should have already let you have your way with one of mine,

but I haven't want to be without em. :msp_mellow:

Will get a new 50cc top end for the old one at some point. :msp_biggrin:

 

[nmurph]

Yes it is. Didn't know if I'd ever get a chance at one. :msp_sad:

There's not any reason for anyone to be without a 346:msp_wink::msp_wink:!!

 

[Stumpys Customs]

Done a lil work to the 357 carb that's goin on it.

I also went with a screw type clamp.

 

[nmurph]

Done a lil work to the 357 carb that's goin on it.

Did you just bore it or did you open the jetting?

I also went with a screw type clamp.

The screw-type clamps are good, but the metal spring types work just fine too. The important thing is to stay away from the plastic clamps.