procarbine2k1
Addicted to ArboristSite
On a rev-limited saw, such as the Makita DCS6401.. how in the heck can I check this saw for tune. Seems as though this saw tuned rich or lean, meets at the limiter before I can get a good ear for the 4 stroke.
Since this saw came on the lean side from the factory, I trimmed the H tab earlier this winter, and just got around to tuning it today (great weather today). I richened it up quite a bit, felt it 4 stroking in the cut a bit and trimmed it back about an 1/8 turn. Seems to be well in tune, but am a little uneasy about this saw being on the lean side.
I apologize in advance if this has been answered, but since I cant find anything on it I figured I would ask again...
Since this saw came on the lean side from the factory, I trimmed the H tab earlier this winter, and just got around to tuning it today (great weather today). I richened it up quite a bit, felt it 4 stroking in the cut a bit and trimmed it back about an 1/8 turn. Seems to be well in tune, but am a little uneasy about this saw being on the lean side.
I apologize in advance if this has been answered, but since I cant find anything on it I figured I would ask again...