Javerhammar
New Member
Ok - that explains it 
Sach Dolamar 110. Specs, parts information needed
- Thread starter Freakingstang
- Start date
Help Support Arborist Forum:
Howard Justice
ArboristSite Operative
Brand new here. First post. Bought a new Sachs Dolmar 110 in 1989? Dealer in Columbia TN. Sat on my garage shelf for years as the 290 and 362 were better suited for the tasks at hand. Recently dusted her off and w a new plug she runs strong. Air filter intake is broken. Repaired w tape. Chain brake was pulled off by dealer who couldnt repair it.
Are parts still available for this saw?
Lurked on the perimeter of this site about a year. Learned much. Just set up an acct. Thanks for your thots. Pics later.
Are parts still available for this saw?
Lurked on the perimeter of this site about a year. Learned much. Just set up an acct. Thanks for your thots. Pics later.
Yes it is and there are carbs out thee with the logo on them but the carbs are actually Tillotson.
Parts are starting to dry up for these saws as they are getting up there in years. Scott has a complete clutch cover with the brake assembly, link below. The bands alone are just about impossible to find, what all is missing for your brake assembly?
https://store.chainsawr.com/search?page=10&q=Dolmar+110
Howard Justice
ArboristSite Operative
Howard Justice
ArboristSite Operative
Everything. Thanks for your rapid response.
Check out that link I posted, the seller often has parts for the 109, 110, 111 and 115 Dolmar saws.
Howard Justice
ArboristSite Operative
May i ask the best way to contact Scott?
Just click on that green link I posted, it will take you right to it and him.
I had to change the first link I put up, it seemed to time out but the one I just posted should work for a while again.
Finnrpm
ArboristSite Operative
Few pics of my 110..
Base gasket delete, timing advance & muffler mod, wood aspen, chain stihl RS .325 .050 / bar 13", setup weight 5.5kg / 12.12lbs
RV
Base gasket delete, timing advance & muffler mod, wood aspen, chain stihl RS .325 .050 / bar 13", setup weight 5.5kg / 12.12lbs
RV
