Sachs Dolmar 115i

[willysmn]

I cannot figure out the chainbrake actuation mechanism on this Sachs Dolmar 115i , and all the parts diagrams show a mechanism that is not correct for this saw. The chain brake "handle" is attached to the cylinder on the clutch side of the saw with a single large screw. The brake band and springs and stuff is all in the clutch cover and works when I activate it by hand. However, there is no connection between the Handle and this mechanism, and, none of the parts diagrams show my chain brake. I ooked at the 114 and it has a different arrangement. So what am I missing?
willysmn

 

[mowoodchopper]

there is a slot and a ear that fits in the slot, cant remember which is on the cover and which is on the saw though

 

[willysmn]

Dolmar 115i

There is a small pin (4mm dia, 4 or so long) that sticks out of the handle down by the chain brake mechanism. It must be part of the attachment. If this jogs your memory or is there is a location with this old parts list, let me know. This has been driving me nuts.