Want to Sell Sachs Dolmar

[oldschoolstihlguy]

I got this saw in trade and it doesn’t say what model it is on the ID plate and the sticker is gone. I’m not a Dolmar guy so I have no idea what model it is or what it’s worth.

Sent from my iPhone using Tapatalk

 

[ammoaddict]

That's a nice clean saw but I don't know the model.

Sent from my moto g(7) power using Tapatalk

 

[Clyde85]

Maybe a 109 or a 110.

 

[ammoaddict]

Looks more like a 111 to me.

Sent from my moto g(7) power using Tapatalk

 

[ammoaddict]

From acres

Sent from my moto g(7) power using Tapatalk

 

[wcorey]

There should be a metal id tag on the lower edge of the crankcase under the clutch cover...

 

[oldschoolstihlguy]

Yeah there is a tag underneath the cover but the model number section is blank


Sent from my iPhone using Tapatalk

 

[Clyde85]

I was thinking the 109 or 110 because it doesn't have the seperate air filter cover.

 

[Denji]

I've got a 109 and it has a different choke lever and chain brake housing, although mine is a newer 'Dolmar' (not Sachs-Dolmar) saw from 2005. It's a great looking little saw you've got there anyway whatever it turns out to be. I love my Dolmars, especially the PS340 - they're bomb proof.

 

[oldschoolstihlguy]

I’d take $100 for it if anyone is interested plus the shipping.


Sent from my iPhone using Tapatalk

 

[Denji]

Does it run and idle?

 

[pioneerguy600]

This design and chassis were very good saws with only a very few problems that happen after many years have passed, the AV rubbers rot out and the oil pickup line leaks where it leaves the tank behind the oil pump. Otherwise they were built strong like a tank and had good grunt for their size.

 

[oldschoolstihlguy]

I would have to put some gas in it and try it, I just cleaned it up and checked the piston to make sure it wasn’t scored.


Sent from my iPhone using Tapatalk

 

[ammoaddict]

I would have to put some gas in it and try it, I just cleaned it up and checked the piston to make sure it wasn’t scored.


Sent from my iPhone using Tapatalk

If you still have the muffler off, could you try and measure the cylinder bore? That would give a better idea of what model it is.

Sent from my moto g(7) power using Tapatalk

 

[oldschoolstihlguy]

Looks like it’s 40mm piston


Sent from my iPhone using Tapatalk

 

[ammoaddict]

I think clyde85 is right. Must be a 110. The 111 is 44mm.

Sent from my moto g(7) power using Tapatalk

 

[oldschoolstihlguy]

It has 155 lbs compression any good fire. I put gas in it and it leaked everywhere, fuel lines and all rubber need replaced


Sent from my iPhone using Tapatalk

 

[oldschoolstihlguy]

Sent from my iPhone using Tapatalk

 

[ammoaddict]

I like it.

Sent from my moto g(7) power using Tapatalk

 

[Den]

Looks like the two 111 saws I had.
Really a great saw with excellent balance.
I sold the one really nice 111 I had, along with a hardcase, to a local guy. If I remember correctly, I got $225 for it, but it was very clean and the carb was rebuilt.


.