Safty Equipment Poll

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

What safty gear do you use when you are working in the woods?


  • Total voters
    128
mercer_me

mercer_me

ArboristSite Operative
Joined
Apr 13, 2009
Messages
407
Location
Central Maine
I wear the fallowing when I working in the woods:
-Labonville Chaps
-Husqvarna Pro Forestry Helmet.
-Labonville Kevlar 2" High Heel Chainsaw Safety Steel Toe Boots (Warm Weather)
-Viking Bushwacker Ballistic Nylon Boot (Cold Weather)
-Kinco Insulated Gloves With Cuff (Cold Weather)
-Kinco Uninsulated Gloves (Warm Weather)
 
TreePointer

TreePointer

Addicted to ArboristSite
AS Supporting Member
Joined
Oct 21, 2008
Messages
3,967
Location
Western PA
The usual for me:

- Stihl Forestry helmet w/metal mesh
- Clear safety glasses under the helmet
- Labonville full-wrap chaps
- Georgia Boot steel toe boots
- Bogs steel toe rancher boots in really cold weather
- Antivibration gloves


I'm looking forward to trying/reviewing the following:

- chainsaw boots w/steel toe
- better noise reduction muffs
- Green Hulk antivibration gloves
- other forestry helmets
 
Last edited:
Laird

Laird

Nemo me impune lacessit
Joined
Oct 22, 2008
Messages
14,821
Location
West Central Indiana
Stihl chaps....next pair will be Labonville full wrap
Pacific Kevlar helmet w/Peltor muffs and face screen
Cabela's steel toed boots
I try different gloves all the time
 
davec

davec

ArboristSite Operative
Joined
Apr 17, 2009
Messages
364
Location
Western Wisc
I find I'm not as religious on putting the chaps on this summer as I was in the winter. Most of what I'm doing now is hauling, so I only pull out a chainsaw for a few minutes here and there and I don't spend the time to put chaps on for that.
 
Plankton

Plankton

ArboristSite Operative
Joined
Jun 3, 2010
Messages
224
Location
Charlemont, MA
When Limbing/bucking I wear labonville reg. chaps, safety glasses and ear plugs. When Felling or doing particularly nasty brush work like clearing blowdowns I wear all of that plus a skull bucket hardhat.
 
jerryw66

jerryw66

ArboristSite Guru
Joined
Jul 13, 2008
Messages
541
Location
Miner County South Dakota
Gloves, ear protection. Ben cuttining 30 yrs. not one bandaid yet from the saw. Got a few minor cuts from fences, branches, or what not, but never from the cutting equipment. Just be careful, never condone someone for wearing too much protective gear, I probably should get some chaps, an old feller told me just today that the right knee is the most likely place to get it.
 
Dalmatian90

Dalmatian90

Addicted to ArboristSite
Joined
Sep 11, 2008
Messages
6,916
Location
Northeastern Connecticut
Gloves, ear protection. Ben cuttining 30 yrs. not one bandaid yet from the saw.

20 years and the saw has never drawn blood. But I've cut two pairs of jeans in identical spots right above the knee over the years. Once I had some money last fall I bought some chaps since they're far cheaper then an ER co-pay. Heck, they're almost as cheap as a pair of jeans from the fat & lanky store so it's almost a trade-off if they just save one pair of denim :)

Chaps, helmet, gloves (Anti-vibe or Kinkos...Kinkos are the only work gloves I can find that fit my hands comfortably!)

Right now just a pair of good hiking boots...I have a pair of steel-toed firefighter boots I bought at a really, really good close-out price last year. When they arrived one foot fit, and the other didn't...which is how I discovered a problem that one of my legs was swelling. Making good progress on that problem so hopefully they'll fit by this fall. (I used to wear a pair of old leather fire boots...but after 15 years between fires and use out in the woods/yards, they were beyond shot)
 
Last edited:
Steve NW WI

Steve NW WI

Unwanted Riff Raff.
Joined
Jan 10, 2009
Messages
7,880
Location
Wisconsin
I voted chaps, steel toes and helmet. I didn't include gloves, because I don't really consider them safety gear, more or less just work gear.

If I'm just bucking out in the open where there's no danger overhead, I lose the brain bucket and just wear ear protection.

Shoulda voted other as well, since safety glasses are always part of the gear.
 
Oldtimer

Oldtimer

Addicted to ArboristSite
Joined
Jan 25, 2010
Messages
1,439
Location
New Hampshire
Gloves, ear protection. Ben cuttining 30 yrs. not one bandaid yet from the saw. Got a few minor cuts from fences, branches, or what not, but never from the cutting equipment. Just be careful, never condone someone for wearing too much protective gear, I probably should get some chaps, an old feller told me just today that the right knee is the most likely place to get it.

Grammar Nazi feels compelled to correct the wrong;

Condone = approve.

Condemn =dis-approve.


Also, the most likely spot for a cut is above the left knee.

DIS-MISSED!

grammar-nazi.jpg
 
logbutcher

logbutcher

Addicted to ArboristSite
Joined
Apr 22, 2004
Messages
2,411
Location
Maine
Full PPE...always. Never can out run the chain.
Labonv. Full Wrap Chaps ( they are hot ! )
Full helmet system ( Bailey's German top )
Steel toe boots ( flip flops optional).
Kevlar gloves ( recent buy after first hand blood while sharpening )

Now the "others":
1. Recertification course in Wilderness Medicine
What to do away from EMT or E.R. assistance--like 'woods'.

2. From #1-- heavy duty blood absorb pads e.g. real Kotex, not those skinny things, duck tape, sea whistle around my neck.

3. Many rural areas here in Downeast Maine are cell dead zones. So no cell phone.

4. CLP and/or GOL training---do one or the other. " I've been using a saw for
XX years without drawing blood. Who needs all that stuff ?":monkey:

No silly face macho cutter here. The same safety techniques for chainsaw work as with firearms, rock climbing, winter mountaineering. I want to choose when to not come down for breakfast.
 
Top