T27 is all that really matters.
Silver
Gold
Ect
AM or OE
You've been staring at that pile so.....
Silver
Gold
Ect
AM or OE
You've been staring at that pile so.....
You can become a Supporting Member which comes with a decal or just click here to donate.
How many you wantT27 is all that really matters.
Silver
Gold
Ect
AM or OE
You've been staring at that pile so.....
Did you use them?My Local Stihl Dealer Has These Kits For 29.99 With 100’s Of Fine And Coarse Screws( All T27) Bar Nuts ,Carb Nuts
What kind you got 6mm or 5mm?How many you want
My Local Stihl Dealer Has These Kits For 29.99 With 100’s Of Fine And Coarse Screws( All T27) Bar Nuts ,Carb Nuts
I would imagine you have a few, lolHow many you want
Tempting but I have most of odd threads and nuts in stock. The machine thread screws is what I use the most. Missing 4-6mm fine thread most times. Anything with flathead type also gets updated. Might be worth looking into larger new stuff unless I find a bunch of used ones.5910 007 1061
Well if you don't measure the length you will run into trouble.What kind you got 6mm or 5mm?
Prefer the longer stuff from 1" and up in those.
Most of the 4mm screws are around an inch or shorter. I don’t measure much in mm lengths just thread size mostly.
If you want AM just buy from any sponsor, Bruce, or Farmertec. If none of those three work give me a detailed list of what you want but I need specifics. If you have old round head straight slot screws I will gladly buy or trade for them.T27 is all that really matters.
Silver
Gold
Ect
AM or OE
You've been staring at that pile so.....
How many boxes you want? I have full boxes of straight slotted machine screws in all pitches. I don't use them at all. Inherited literally full boxes if them and they are all sitting in drawers in the shop. I mostly use Holo-Chrome socket head caps.If you have old round head straight slot screws I will gladly buy or trade for them.
Specifically OEM Stihl 5mm x 20mmHow many boxes you want? I have full boxes of straight slotted machine screws in all pitches. I don't use them at all. Inherited literally full boxes if them and they are all sitting in drawers in the shop. I mostly use Holo-Chrome socket head caps.
As long as they are the correct head and size they will work. I can use some SAE ones also but once again the head has to be right.Mine are all generic slotted, and plated not Stihl. Sorry.
Enter your email address to join: