I see this all the time, live edge slabs that are crap for hundreds of dollars. Sent from my SM-G950U using Tapatalk
Have never flushed the saws. No issues. A gummy chain ain't no real issue to me. But we don't see negative temps in Winter, so that might be the main reason no hardening issues.Canola oil can harden, if left in place, leading to problems. Bet to flush it out with Dino oil if your saw is gonna sit for a while.
Philbert
That ain't no jokeUnless its twisted grain fenceline ash.
They shouldn't be destroying anything that isn't wet, although they may nest in it.Do you treat around your house to kill carpenter ants. It's just part of my spring routine battle, man vs ants, they try to destroy our buildings here.
I might give it a go one day if I run out of bar oil - cheers mate have a great Xmas!It's all I use, for years now.
You too mate. Good luck for the rest of the fire season over there.I might give it a go one day if I run out of bar oil - cheers mate have a great Xmas!
I also hung up the drinking for a bit. Had to take a good look at myself and then rethink what I was doing. Now I might have one during the week and mainly drink on the weekends. I was up to 12-18 a day. Not a healthy way to be. Figured I’d be in a hole before getting a chance to dance with my daughters at their weddings. So, cold turkey for a good 6 months and now just try to find other outlets for my ............ “energy”I don't mind a drink as you can probably tell, I had given up for about 8mths or more then started again last week, I'm trying to be good and not go back to the old ways, not sure how successful that's going to be but I haven't been too bad, the other day was the worst so far.
A solid 5 hours south of me.Minnesota guys, any of you near Faribault? I’m in a group of 20 Dealers, we have a member of the group from there. NADA 20Group......
Minnesota guys, any of you near Faribault? I’m in a group of 20 Dealers, we have a member of the group from there. NADA 20Group......
I am about 2 and a half hours south east of Faribault.Minnesota guys, any of you near Faribault? I’m in a group of 20 Dealers, we have a member of the group from there. NADA 20Group......
About an hour south of me.Minnesota guys, any of you near Faribault?
I also hung up the drinking for a bit. Had to take a good look at myself and then rethink what I was doing. Now I might have one during the week and mainly drink on the weekends. I was up to 12-18 a day. Not a healthy way to be. Figured I’d be in a hole before getting a chance to dance with my daughters at their weddings. So, cold turkey for a good 6 months and now just try to find other outlets for my ............ “energy”
That ain't no joke.
I've split a good amount of ash, when it's easy it's easy, but when it isn't you will think your going to pop welds on the hydraulic splitter.
Canola oil can harden, if left in place, leading to problems. Bet to flush it out with Dino oil if your saw is gonna sit for a while.
Philbert
Enter your email address to join: