Alrighty, we are getting into the home stretch of me giving up the saw hobby. Here we have a nice slant fin 044. It starts, runs, oils, and idles as it should. I ran it a bit this past weekend and it did everything it is supposed to do. It has a new OEM DP cover on the muffler. Piston is clean and smooth when I ran my pinky finger over it, as shown in the pictures, but it is obviously not brand new. Compression is 155 on my gauge. This is a Mahle slant fin cylinder. I did not get my calipers out, but it looked to me that the starter and other screws are the smaller 4mm.
Optional Item #1: Available with a 20" GB Titanium that has seen maybe 15 tanks, and a loop of Oregon chain that has seen about the same.
Optional Item #2: I also have a clean starter housing with new pawls and retainer spring, as well as a new rope grommet (the thing that the rope goes through right before emerging from the starter housing). Good rope, standard non-elastostart handle.
We can do this a couple of different ways. This is my last Stihl so I don't really need to keep the bar around, but if you want PHO, that's fine, too. Since shipping has killed me on the last few saws I have sold to west coast buyers, I'm going to do this:
$535 shipped PHO east of the Mississippi
$555 shipped west of the Mississippi
$500 local pickup in East Lansing.
Bar and chain for +$30 to any location. Add the extra starter housing for +$15 to any location.
Not looking for trades at this time. Payment by PayPal Gift strongly preferred unless local pickup, in which case cash is preferred.
![IMG_7296.JPG IMG_7296.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263645-38b9afb242530b1f39c0cf333ffd6a5f.jpg)
Optional Item #1: Available with a 20" GB Titanium that has seen maybe 15 tanks, and a loop of Oregon chain that has seen about the same.
Optional Item #2: I also have a clean starter housing with new pawls and retainer spring, as well as a new rope grommet (the thing that the rope goes through right before emerging from the starter housing). Good rope, standard non-elastostart handle.
We can do this a couple of different ways. This is my last Stihl so I don't really need to keep the bar around, but if you want PHO, that's fine, too. Since shipping has killed me on the last few saws I have sold to west coast buyers, I'm going to do this:
$535 shipped PHO east of the Mississippi
$555 shipped west of the Mississippi
$500 local pickup in East Lansing.
Bar and chain for +$30 to any location. Add the extra starter housing for +$15 to any location.
Not looking for trades at this time. Payment by PayPal Gift strongly preferred unless local pickup, in which case cash is preferred.
![FullSizeRender.jpg FullSizeRender.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263636-8db006c61181b30df335840cfb7f6a07.jpg)
![IMG_7287.JPG IMG_7287.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263637-a5763af5b792012f3aa764559cd3de05.jpg)
![IMG_7288.JPG IMG_7288.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263638-f788f250a7923c493b888786ed4b104f.jpg)
![IMG_7289.JPG IMG_7289.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263639-741acf5d80b599994ccd079ea7fc929e.jpg)
![IMG_7290.JPG IMG_7290.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263640-dbb81a8a411978854eb8bf74f8972c3c.jpg)
![IMG_7291.JPG IMG_7291.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263641-b4c60b8a896a129d42e04386cdaecae2.jpg)
![IMG_7293.JPG IMG_7293.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263642-7ed25ba330b308e09a8888a1ba8161b4.jpg)
![IMG_7294.JPG IMG_7294.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263643-c4712ac6f08a83724217203c3eddaafe.jpg)
![IMG_7295.JPG IMG_7295.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263644-b4e4e08ae80118c5b4e7964365e27c90.jpg)
![IMG_7296.JPG IMG_7296.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/263/263645-38b9afb242530b1f39c0cf333ffd6a5f.jpg)