Stihl 020T with points?

[Stihl 041S]

I bought a pair of 020Ts a few months back and just getting around to them. 50 psi on compression, then found rubber seals under the carb and muffler. 140 is better but didn't wanna run. I looked and it had points. I thought all 020Ts had electronic ignition, or am I wrong?

 

[Tzed250]

I bought a pair of 020Ts a few months back and just getting around to them. 50 psi on compression, then found rubber seals under the carb and muffler. 140 is better but didn't wanna run. I looked and it had points. I thought all 020Ts had electronic ignition, or am I wrong?

Do you mean an 020AV?

 

[Stihl 041S]

I bought them here on AS and the add said 020T, they are top handles.

 

[lcso10]

There was some models 020's back in the day that had points. I think they were mostly white. I sent a flywheel several weeks ago to a member here. I dont see many of those older 020's around anymore. They were good saws.

 

[Lakeside53]

Never on an 020T.. you have 020... completely different.

 

[Stihl 041S]

So what you are saying about my purchase is.......

Sung to the tune of "The Mickey Mouse Club Song"

Ef-you-see-kay-E-dee A-G-A-I-N...........

Let the buyer beware!!!

 

[crane]

That comment shot coffee over the desk!

you got rep for that

 

[Stihl 041S]

That comment shot coffee over the desk!

Now try singing"Amazing Grace" to the tune of"Gilligan's Island"
Neither of which turn an 020 into an 020T!!!!!!!!

 

[epicklein22]

I have some 020av parts if you need them. The cylinder and piston are shot along with some other stuff, but I have some good parts left. I have the rear handle version, so maybe you would want to convert your saws into a 020 avp (anti-vibe professional).

 

[Stihl 041S]

I have some 020av parts if you need them. The cylinder and piston are shot along with some other stuff, but I have some good parts left. I have the rear handle version, so maybe you would want to convert your saws into a 020 avp (anti-vibe professional).

Many thanks. I'll see what I need as I bought these to go with one I was rebuilding which was a real 020T.

Not like the 2 I bought. Ef-you-see.................................

 

[Stihl 041S]

I have some 020av parts if you need them. The cylinder and piston are shot along with some other stuff, but I have some good parts left. I have the rear handle version, so maybe you would want to convert your saws into a 020 avp (anti-vibe professional).

I might have some 075 parts I can swap you. I do know these are 075 parts, before someone says something.

 

[04ultra]

020av

020T and 200T

 

[Stihl #1]

Well Ultra, you saved me a trip to the shop to take pics!
The top pic is an 1114 series, early vintage 020,
1114 020 1971-1979
020AVP 1972-1979
020 SUPER 1979-1994

The bottom pics are the newer design, 1129 series,
1129 020T 1994-2001
MS200T 2001-current

I have posted series number lists several times, and that is how you know what you have. Look at the first four numbers of a part number on the filter cover or tank housing, or any part unique to the saw, and you can verify what it is. Be aware some parts are used for lots of different models, so be sure to check a part only found on that saw.

 

[Stihl 041S]

020av

020T and 200T

Thanks, I'll get a tattoo so I won't screw up again. Big difference.